Unit of competency Outline

Date retreived
22/07/2026 1:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble, install and test braking system kits

Assemble, install and test braking system kits

Unit of competency
National Code
AUMGTB001
State Code
WH953
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030503 - Vehicle Mechanics
Original Release Date
11/03/2014
Nominal Hours
40
Description
This unit describes the performance outcomes required to assemble, install and test a vehicle braking system kit and its associated components.It applies to individuals in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan the job
  • 1.1 Work order and job specifications are used to determine installation process
  • 1.2 Braking system and components are identified, selected and inspected
  • 1.3 Tools and equipment required for the job are selected and checked for safe operation
  • 1.4 Assembly and installation information is accessed from manufacturer specifications
2. Assemble and install braking system kit
  • 2.1 Assembly and installation activities are carried out according to workplace procedures
  • 2.2 Braking system kit is assembled using appropriate sources of information
  • 2.3 Braking system kit is installed using installation procedures that comply with manufacturer specifications, tolerances and adjustment requirements
3. Test braking system
  • 3.1 Test information is accessed and interpreted from manufacturer specifications
  • 3.2 System tests are carried out according to manufacturer specifications and workplace procedures
  • 3.3 Braking system assembly and test results are recorded
4. Complete work processes
  • 4.1 Tools and equipment are cleaned, inspected for defects and stored according to workplace procedures
  • 4.2 Faulty tools and equipment are identified, tagged and reported according to workplace procedures
  • 4.3 Workplace documentation is completed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE153 AUMGTB3001 Assemble and install braking system kit Unit of competency
Replaced By
State Code National Code Title Type
OAL50 AUMGTB011 Assemble, install and test braking system kits Unit of competency