Unit of competency Outline

Date retreived
22/07/2026 3:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply emulsion wax to timber flooring

Apply emulsion wax to timber flooring

Unit of competency
National Code
MSFFL3093
State Code
OAJ35
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to select emulsion wax coating systems appropriate for the job, prepare for the work and apply the selected coatings to timber and parquetry floors.This unit applies to flooring technicians working in accordance with pre-determined work ordersLicensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Identify and prepare for work requirements
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Read work documentation and identify job requirements
  • 1.3 Select coating material based on product qualities and client expectations
  • 1.4 Assess selected coating materials as being compatible with each other, with the surface to be finished and with manufacturer recommendations
  • 1.5 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
  • 1.6 Inspect and confirm readiness of surface to be finished, and erect barrier signs to coating area
  • 1.7 Plan sequence of work to ensure efficiency and quality of application.
2. Apply finishing system
  • 2.1 Check ventilation before chemical fumes are released, and confirm all work health and safety, and environmental protection requirements are met
  • 2.2 Prepare emulsion wax in accordance with manufacturer specifications
  • 2.3 Apply emulsion wax in accordance with manufacturer recommendations
  • 2.4 Observe recommended drying times between coats
  • 2.5 Buff and sand between coats in accordance with manufacturer recommendations
  • 2.6 Check final finish against quality and job requirements, and rectify deficiencies
  • 2.7 Provide required floor maintenance instructions and warranty provisions to the client in accordance with workplace procedures
3. Complete housekeeping
  • 3.1 Store and recycle unused materials in accordance with workplace procedures
  • 3.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 3.3 Clear and clean work area and dispose of rubbish safely
  • 3.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI384 MSFFL3027 Apply emulsion wax to timber flooring Unit of competency
State Code National Code Title Type
BED0 MSF30818 Certificate III in Flooring Technology Qualification