Unit of competency Outline

Date retreived
22/07/2026 10:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out masonry veneer construction

Carry out masonry veneer construction

Unit of competency
National Code
CPCCBL3002
State Code
OCR15
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
44
Description
This unit specifies the skills and knowledge required to construct masonry veneer buildings and structures. It includes structural, non-structural components and finishing of masonry veneer construction. This unit applies to people who work on masonry veneer construction on new or existing structures. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work.
  • 1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 1.2 Read and interpret masonry veneer construction requirements from current plans, specifications, standards and codes.
  • 1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures.
  • 1.4 Calculate material quantities for the task.
  • 1.5 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.6 Identify potential hazards and determine and implement control measures.
  • 1.7 Select and check condition of plant, equipment and tools and report damage to relevant person.
  • 1.8 Check materials against the specifications and report non-conformities to relevant person.
2 Set out brickwork/blockwork.
  • 2.1 Set out and mark base brickwork/blockwork.
  • 2.2 Set out brickwork/blockwork gauge and bond.
  • 2.3 Set out and mark masonry veneer walls, load bearing brickwork, and corbelling.
3 Construct base brickwork/blockwork.
  • 3.1 Place materials ready for the work.
  • 3.2 Mix mortar to specified consistency.
  • 3.3 Locate, prepare and install damp proof course and weepholes.
4 Construct veneer walls.
  • 4.1 Check and ensure that structural frame is plumb and straight.
  • 4.2 Position and correctly fix wall ties to framework.
  • 4.3 Install specified lintels to openings.
  • 4.4 Install flashings to window and door openings.
  • 4.5 Construct brickwork/blockwork walls to eaves height.
  • 4.6 Construct veneer gable maintaining gauge, level, plumb and straightness.
  • 4.7 Locate and form control joints as specified.
  • 4.8 Cut and lay sill bricks to a line.
5 Rake/rule joints and clean face.
  • 5.1 Clean cavities of mortar droppings and bridging.
  • 5.2 Rake or rule joints to specified profile and depth.
  • 5.3 Clean face of brickwork/blockwork to remove unwanted mortar.
6 Clean up.
  • 6.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 6.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 6.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9321 CPCCBL3002A Carry out masonry veneer construction Unit of competency
State Code National Code Title Type
BGD8 CPC33020 Certificate III in Bricklaying and Blocklaying Qualification