Unit of competency Outline

Date retreived
22/07/2026 5:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply general purpose hand skills aboard a vessel

Apply general purpose hand skills aboard a vessel

Unit of competency
National Code
MARN001
State Code
WH877
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
07/10/2013
View on TGA
State Implementation and Classification
Approved Date
04/02/2014
Field of Education
031705 - Marine Craft Operation
Original Release Date
04/02/2014
Nominal Hours
25
Description
This unit involves the skills and knowledge required to perform general purpose hand duties aboard a vessel.This unit applies to general purpose hands working in the maritime industry on vessels up to 80 metres. They could be working independently or as part of a vessel crew.This unit has links to legislative and certification requirements.
Notes
Elements and Performance Criteria
1 Use and maintain ropes
  • 1.1 Rope types and common areas of use are correctly identified
  • 1.2 Ropes are checked for wear and any damage is reported according to workplace procedures
  • 1.3 Ropes are coiled and stowed correctly
  • 1.4 Knots and hitches are tied neatly and securely, and are used according to their correct application
  • 1.5 Ropes are spliced neatly and securely according to their correct application and rope ends are whipped where instructed, to maintain good condition
2 Operate deck machinery and emergency stops
  • 2.1 Prior to use, deck machinery is checked and prepared for operation
  • 2.2 Operations are carried out safely according to instructions and standard operating procedures (SOPs) or organisational safety management system (SMS)
  • 2.3 Emergency stops on motor and machinery are operated in response to an emergency situation
3 Assist in securing vessel at anchor
  • 3.1 Prior to letting go, anchor and equipment are prepared as instructed and organisational communications are followed
  • 3.2 Instructions provided are complied with in relation to quantity of anchor cable run out or recovered
  • 3.3 During operation, control of cable is maintained within safe operating limits
  • 3.4 On completion of anchoring operations, anchor and equipment are secured according to instructions
  • 3.5 Throughout all operations, anchoring area is kept free of loose ropes, wires and debris
4 Assist in securing and adjusting vessel position during mooring operations
  • 4.1 At all times, mooring lines and associated equipment are handled safely
  • 4.2 Mooring plan and organisational communications are followed
  • 4.3 Throughout mooring operations, mooring area is kept free of loose ropes, wires and debris
  • 4.4 Tension on ropes is maintained at an appropriate level for the stage and nature of the operation
  • 4.5 Mooring lines are secured according to instructions provided
  • 4.6 Equipment malfunction or problems encountered during operations are promptly reported
5 Assist in securing vessel for sea
  • 5.1 Cargo and cargo handling equipment are checked to ensure they are stowed securely
  • 5.2 Hatches and openings are checked to ensure they are secured as required
  • 5.3 Maintenance equipment is returned to storage location and secured
  • 5.4 Assistance is provided in testing equipment as instructed
  • 5.5 All mooring lines are stowed and secured
  • 5.6 Assistance is provided in stowing the gangway
6 Perform tasks aloft and over vessel side
  • 6.1 Area and equipment for working aloft or over the side are prepared as instructed
  • 6.2 Required precautions are taken when working aloft or over the side
  • 6.3 Chairs, safety harnesses and appropriate safety equipment are used according to workplace procedures
  • 6.4 Tasks are completed safely according to instructions and organisational SMS
  • 6.5 After use, equipment is maintained and stored
7 Assist with safe refuelling operations
  • 7.1 All personal protective equipment is accessed and used
  • 7.2 Safety boundary for the refuelling process is established
  • 7.3 Instructions are followed to ensure spill prevention systems are correctly deployed
  • 7.4 Instructions are followed in completing tasks related to the refuelling or fuel transfer process
No information
No information
Replaces
State Code National Code Title Type
WG513 MARN1001A Apply general purpose hand skills aboard a vessel Unit of competency
Replaced By
State Code National Code Title Type
OCH01 MARN010 Apply general purpose hand skills aboard a vessel Unit of competency