Unit of competency Outline

Date retreived
22/07/2026 2:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and test emergency and exit lighting systems

Inspect and test emergency and exit lighting systems

Unit of competency
National Code
CPPFES2026
State Code
OCW18
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/01/2021
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
039905 - Fire Technology
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit of competency specifies the skills and knowledge required to inspect and test the functional operation of emergency and exit lighting systems installed at client premises. Service activities are conducted in compliance with requirements of the relevant Australian Standards and National Construction Code (NCC).The unit does not cover any installation, replacement, maintenance or repair functions that are restricted to licensed trades or occupations.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare for service operation.
  • 1.1 Read work instructions to clarify service timeframes, client needs, and site and single point system locations.
  • 1.2 Discuss planned service procedures with relevant persons to clarify client needs and expectations.
  • 1.3 Plan work activities to comply with relevant Australian Standards, NCC, regulatory, work health and safety (WHS) and workplace requirements.
  • 1.4 Identify potential and actual breaches of rules and regulations associated with work instructions and take required action to ensure compliance according to regulatory and workplace requirements.
  • 1.5 Select and use required tools and equipment, including personal protective equipment (PPE).
  • 1.6 Arrange access to worksite and communicate with responsible entity and affected persons to advise duration and impact of planned service procedures and to ensure alternative safety arrangements are implemented.
  • 1.7 Identify and prepare to control hazards in the work area according to workplace requirements.
2 Inspect and test single point systems.
  • 2.1 Inspect and test single point systems according to relevant Australian Standards, regulatory and workplace requirements.
  • 2.2 Replace defective components where permitted according to Australian Standards and workplace requirements.
  • 2.3 Report defects and conduct permitted repairs according to regulatory and workplace requirements.
3 Finalise service operation.
  • 3.1 Complete service records and report outstanding defects, non-compliances and recommended rectifications according to Australian Standards, regulatory and workplace requirements.
  • 3.2 Check tools and equipment for faults, wear or damage and rectify or report problems according to workplace requirements.
  • 3.3 Leave client premises in a clean and tidy condition.
No information
No information
Replaces
State Code National Code Title Type
WC141 CPPFES2026A Inspect and test emergency and exit lighting systems Unit of competency
State Code National Code Title Type
BGJ6 CPP20521 Certificate II in Fire Protection Inspection and Testing Qualification