Unit of competency Outline

Date retreived
23/07/2026 2:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a continuous press

Operate a continuous press

Unit of competency
National Code
FWPWPP3226
State Code
AXJ18
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to set-up, operate and shut-down the continuous press to form and press board for a range of available boards.The unit applies to production operators and technicians who operate a continuous press in a forest and wood products factory setting. Licensing, legislative, regulatory, or certification requirements apply to this unit in some states & territories at the time of publication, and may differ according to jurisdiction.
Notes
Elements and Performance Criteria
1. Prepare for pressing.
  • 1.1 Review and check work order with appropriate personnel.
  • 1.2 Identify hazards and control risk in the work area according to workplace requirements.
  • 1.3 Select type and quantity of chips, flakes or fibre to be pressed, from storage location.
  • 1.4 Conduct pre-start checks on equipment in line with manufacturer’s recommendations and site requirements.
  • 1.5 Plan pressing process in line with site procedures.
  • 1.6 Communicate plan with relevant personnel as required, to ensure safety and production requirements are met, in line with site procedures.
2. Form, press, test and transfer finished boards.
  • 2.1 Set and adjust press pressures, temperatures and product parameters according to production requirements.
  • 2.2 Check operational condition and set-up of former to confirm mat condition.
  • 2.3 Check forming equipment for defects and position to load press in line with standard operating procedures.
  • 2.4 Press boards while monitoring and adjusting board position, feed rate, mat condition and press condition.
  • 2.5 Plan size changes and line speeds to meet production schedules.
  • 2.6 Regularly assess pressed board and thickness changes and make necessary changes to former, press set-up and blending requirements.
  • 2.7 Test board samples to confirm adherence to industry standard and reject defective boards.
  • 2.8 Dispose of defective boards in line with site procedures and environmental requirements.
  • 2.9 Transfer finished boards for further processing in line with site requirements.
3. Shut down, clean equipment and record information.
  • 3.1 Shut down equipment in coordination with designated stop time and other line operators, in line with site procedures.
  • 3.2 Separate and remove board and forming equipment from press using unloading equipment.
  • 3.3 Strip and clean blending equipment, press and handling equipment in line with standard operating procedures.
  • 3.4 Clear foreign material, dust and debris from machine area in line with workplace requirements.
  • 3.5 Record and report pressing process and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6141 FPIWPP3226B Operate a continuous press Unit of competency
Replaced By
State Code National Code Title Type
OAN37 FWPWPP3234 Operate a continuous press for the production of engineered wood panels Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification