Unit of competency Outline

Date retreived
22/07/2026 12:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply drawing principles to stonemasonry

Apply drawing principles to stonemasonry

Unit of competency
National Code
CPCCST3023
State Code
OCP32
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
25
Description
This unit specifies the skills and knowledge required to use manual drafting techniques to produce stonemasonry sketches and drawings from standards, specifications and project briefs. It includes freehand sketching to depict and communicate ideas and information using technical drawing techniques. This unit applies to stonemasonry workers who use drawings to transfer information to assist in off-site production, onsite set out, cutting and shaping and installation of elaborate masonry elements. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing stonemasonry drawing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for drawing.
  • 1.1 Identify project objectives and design from plans, specifications, standards and codes.
  • 1.2 Establish stonemasonry component shape, dimensions and key features.
  • 1.3 Determine appropriate drawing medium to suit job requirements.
  • 1.4 Select drawing equipment, instruments and materials to produce appropriate drawing.
2 Draft initial drawing.
  • 2.1 Hand sketch an isometric prototype to assist with designing the drawing.
  • 2.2 Apply notations to sketch.
  • 2.3 Check sketch against project objectives and specifications.
  • 2.4 Identify, rectify and clarify any non-conformities with appropriate person.
3 Create a technical drawing using hand drawing techniques.
  • 3.1 Select paper size according to project objectives.
  • 3.2 Set out the title block and location of plan, section, elevation and detail views.
  • 3.3 Produce a scaled orthographic drawing including measurements, symbols and abbreviations.
  • 3.4 Develop basic specifications from compiled information and drawings.
No information
No information
No information
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification