Unit of competency Outline

Date retreived
23/07/2026 2:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct prototypes and samples for timber structures

Construct prototypes and samples for timber structures

Unit of competency
National Code
FWPTMM4208
State Code
OAN49
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
21/05/2019
Field of Education
040311 - Carpentry And Joinery
Original Release Date
21/05/2019
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to construct prototypes and samples of timber structures in a production setting according to established plans, drawings or other specifications for testing the viability of timber construction methods. The unit applies to individuals who work as timber fabricators, supervisors and designers of timber structures. They generally demonstrate autonomy, judgement and limited responsibility in known or changing contexts and within established parameters.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for construction of prototypes and samples for timber structures
  • 1.1 Review the purpose for prototype or sample, work order, prototype construction plans, workplace health and safety requirements, environmental protection practices and emergency procedures and, where required, clarify requirements with appropriate personnel
  • 1.2 Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislation to maintain safe work practices
  • 1.3 Obtain the type and quantity of material to be assembled and hardware according to prototype construction plan and specifications
  • 1.4 Select appropriate tools and equipment and check for operational effectiveness according to manufacturer recommendations
  • 1.5 Plan and document stages of the prototype construction process
2. Set up equipment and components
  • 2.1 Select and prepare set-up jigs required for prototype construction
  • 2.2 Select timber components, check for compatibility with specifications and cut according to the prototype or sample plans
  • 2.3 Position and clamp components in jigs ready for joining with allowable faults, joins and grain according to construction standards and grading rules
  • 2.4 Identify defective components, incorrect timber cuts and off-cuts and dispose of or recycle according to environmental protection practices
  • 2.5 Staple components to maintain temporary alignment during assembly
3. Construct and review prototypes and samples
  • 3.1 Follow prototype construction plan throughout the assembly and conduct checks at designated points
  • 3.2 Position and install hardware on joints to prototype specifications
  • 3.3 Nail or staple temporary bracing to the product according to construction standards
  • 3.4 Identify required modifications to designs and plans, and document and follow recommended changes
  • 3.5 Correct construction faults according to recommendations
  • 3.6 Review prototype or sample for the effectiveness of purpose and efficiency of timber construction methods
  • 3.7 Record prototype or sample construction processes, problems and recommendations for change, and report to appropriate personnel
  • 3.8 Store temporary bracing, prototypes and samples and dispose of when not required according to environmental protection practices
No information
No information
Replaces
State Code National Code Title Type
AXJ65 FWPTMM4201 Construct prototypes and samples Unit of competency