Unit of competency Outline

Date retreived
22/07/2026 5:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct Complex Levelling and Alignment

Conduct Complex Levelling and Alignment

Unit of competency
National Code
UEPMNT402A
State Code
S5111
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
07/05/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
07/05/2008
Nominal Hours
60
Description
1)
This unit deals with the skills and knowledge required to conduct the advanced alignment of plant and machinery and may include high speed rotating plant.
Notes
Elements and Performance Criteria
1 Plan and prepare for the work
  • 1.1 Work requirements are identified from request/work orders or equivalent and clarified/confirmed with appropriate parties or by site inspection
  • 1.2 Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers' specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedure
  • 1.3 Resources required to satisfy the work plan are identified, obtained and inspected for compliance with the job specifications
  • 1.4 Relevant plans, drawings and texts are selected and interpreted in accordance with the work plan
  • 1.5 Correct size, type and quantity of materials/components are determined, obtained and inspected for compliance with the job specifications
  • 1.6 Work is planned in detail including sequencing and prioritising and considerations made, where appropriate, for the maintenance of plant security and capacity in accordance with system/site requirements
  • 1.7 Co-ordination requirements, including requests for isolations where appropriate, are resolved with others involved, affected or required by the work
  • 1.8 Potential hazards are identified and prevention and/or control measures are selected in accordance with the work plan and site procedures
  • 1.9 Work area is prepared in accordance with work requirements and site procedures
  • 1.10 Where appropriate, the teams and individuals roles and responsibilities within the team are identified, and where required, assist in the provision of on-the-job training
2 Perform alignment
  • 2.1 Required isolations are confirmed where appropriate in accordance with enterprise/site requirements
  • 2.2 Measurements are taken and recorded to facilitate compliance with manufacturer specifications and future job requirements
  • 2.3 Levelling and alignment calculations are performed and sketches made as required in accordance with the work plan
  • 2.4 Plant and machinery is levelled and aligned, and adjustments made to ensure compliance with manufacturer specifications and the work plan
  • 2.5 Final alignment inspections are undertaken and fastenings are torqued in accordance with manufacturer specifications and the work plan
  • 2.6 Plant and machinery is test run, monitored and adjusted as required in accordance with manufacturer specifications and job/site requirements.
3 Complete the work
  • 3.1 Work is completed and appropriate personnel notified in accordance with site/enterprise requirements
  • 3.2 Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures
  • 3.3 Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures
  • 3.4 Work completion details are finalised in accordance with site/enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
S3700 UTPNEG061A Conduct complex levelling and alignment Unit of competency
Replaced By
State Code National Code Title Type
WE264 UEPMNT402B Conduct complex levelling and alignment Unit of competency
State Code National Code Title Type
S505 UEP40306 Certificate IV in ESI Generation Maintenance (Mechanical) Qualification