Unit of competency Outline

Date retreived
22/07/2026 9:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake visual inspection

Undertake visual inspection

Unit of competency
National Code
RIICTB301D
State Code
WH165
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
55
Description
This unit describes a participant’s skills and knowledge required to undertake visual inspection in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to undertake visual inspection
  • 1.1. Access, interpret and apply visual inspection documentation and ensure the work activity is compliant
  • 1.2. Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3. Confirm and apply environmental protection and safety requirements
  • 1.4. Obtain interpret and implement traffic management signage requirements
  • 1.5. Select and check for faults plant, tools and equipment to carry out tasks
  • 1.6. elect and wear personal protective equipment appropriate for work activities
  • 1.7. Identify, confirm, safely handle and locate, in ready for use, material required for the work application,
  • 1.8. Identify, address and report hazards, risks and environmental issues
  • 1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Inspect bridge
  • 2.1. Locate access devices in reach of areas for inspection
  • 2.2. Asses defects, faults, damage and deterioration by walking over, under and around the bridge
  • 2.3. Observe bridge under the passage of vehicles to assess faults and deterioration
  • 2.4. Complete written reports on condition of bridge stating findings and methods of correction
3. Clean up
  • 3.1. Clear work area and dispose of or recycle materials
  • 3.2. Clean, check, maintain and store plant, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCY00 RIICTB301E Undertake visual inspections Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification