Unit of competency Outline

Date retreived
22/07/2026 2:40 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diagnose and repair inboard propeller drive systems

Diagnose and repair inboard propeller drive systems

Unit of competency
National Code
AURR313684B
State Code
D656
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
031701 - Maritime Engineering
Original Release Date
12/10/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to diagnose and repair inboard propeller drive systems and associated components on vessels.It requires the ability to identify and confirm work requirements, diagnose and repair marine inboard transmissions and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
  • 1.3. Access and interpret repair method, workshop manuals and manufacturer information
  • 1.4. Check and prepare tools, equipment and materials
  • 1.5. Set up work area
2. Diagnose faults
  • 2.1. Develop a diagnosis strategy
  • 2.2. Undertake tests in accordance with workplace procedures and manufacturer and component supplier specifications
  • 2.3. Compare test results with manufacturer and component supplier specifications to identify compliance or non-compliance
  • 2.4. Decide upon a plan of action to rectify faults
  • 2.5. Document results, including evidence, relevant information and recommendations
  • 2.6. Forward report to persons for action in accordance with workplace procedures
  • 2.7. Finalise repair requirements
3. Repair inboard propeller drive systems and associated components
  • 3.1. Perform repair and adjustment operations in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 3.2. Test system, make required adjustments and re-test
  • 3.3. Check that protective guards, cowlings and safety features are in place according to workplace expectations
  • 3.4. Determine the need for water testing
4. Clean up work area and maintain equipment
  • 4.1. Clean and inspect equipment and tooling according to workplace requirements
  • 4.2. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 4.3. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons as required
  • 4.4. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2938 AURR313684A Diagnose and repair inboard propeller drive systems Unit of competency
Replaced By
State Code National Code Title Type
WF338 AURRTQ3004 Diagnose and repair inboard propeller drive systems Unit of competency
State Code National Code Title Type
D541 AUR30511 Certificate III in Marine Qualification