Unit of competency Outline

Date retreived
22/07/2026 11:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct pelmets

Construct pelmets

Unit of competency
National Code
MSFBA3008
State Code
WI269
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
56
Description
This unit of competency covers cutting, preparing and assembling pelmet components for internal blind installations. It applies in a workplace and on-site residential and commercial environment and may be conducted in small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices are observed throughout the work
  • 1.2 Personal protective equipment is selected and used
  • 1.3 Type of pelmet to be constructed is identified from work order
  • 1.4 Tools and equipment are selected and checked for safe operation
  • 1.5 Materials and hardware are identified and selected
  • 1.6 Work sequence is planned to conform with quality requirements, minimise time and economically use materials
2 Prepare and assemble pelmet components
  • 2.1 Components are measured and cut to specification and laid out ready for assembly
  • 2.2 Components are assembled according to work instructions
  • 2.3 Problems occurring during work operations are identified and reported following workplace practices
3 Complete work
  • 3.1 Completed work is cleaned, packaged and stored according to workplace practices
  • 3.2 Tools and equipment are cleaned, maintained and stored
  • 3.3 Faulty tools and equipment are tagged and reported to appropriate personnel
  • 3.4 Work area is cleaned and waste is disposed of in accordance with industry and enterprise specific policies and procedures
  • 3.5 Workplace documentation is completed
No information
No information
Replaced By
State Code National Code Title Type
OBP06 MSFBA3014 Assemble pelmets Unit of competency
State Code National Code Title Type
J737 MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles Qualification