Unit of competency Outline

Date retreived
23/07/2026 5:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service bicycle drivetrain systems

Service bicycle drivetrain systems

Unit of competency
National Code
AURBTQ001
State Code
AXE37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to service bicycle drivetrain systems and their components. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting and testing bicycle drivetrain systems and components according to manufacturer specifications, and completing workplace processes and documentation.This applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service bicycle drivetrain system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted
  • 1.3 Condition of bicycle drivetrain system is inspected for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications
  • 1.4 Service options and techniques are identified and confirmed with customer
  • 1.5 Replacement parts for drivetrain are identified and sourced as required
  • 1.6 Hazards associated with the work are identified and risks are managed
  • 1.7 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.8 Work area is prepared and service sequence planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of drivetrain system
  • 2.1 Bicycle drivetrain system is serviced according to work plan, manufacturer specifications, and safety and environmental requirements
  • 2.2 Replacement parts are checked and fitted according to manufacturer specifications
  • 2.3 Operation of serviced drivetrain system is tested and adjusted as required according to job requirements and workplace procedures
  • 2.4 Results and quality issues are reported to authorised personnel as required
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedure
No information
No information
Replaces
State Code National Code Title Type
WF060 AURBTQ2001 Service bicycle drivetrain systems Unit of competency