Unit of competency Outline

Date retreived
22/07/2026 10:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain blinds and awnings static machines

Set up, operate and maintain blinds and awnings static machines

Unit of competency
National Code
MSFBA2013
State Code
OEM00
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/04/2023
Nominal Hours
56
Description
This unit describes the skills and knowledge required to safely use static machines, machines that are fixed to a set location for their operation, to produce blinds and awnings. The unit has a focus on the safe use and basic capabilities of a range of static machines commonly used. Workers with this competency follow standard procedures to complete routine tasks.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements, including time frames, from work documentation and instructions from supervisory staff
  • 1.2 Identify and follow work health and safety requirements, including use of personal protective equipment (PPE)
  • 1.3 Check that cutting tools, templates and other required tools and equipment are available, safe and functional
  • 1.4 Select material for machining and check it meets task quality requirements
  • 1.5 Identify procedures for waste minimisation and energy efficiency while completing task
  • 1.6 Plan work process and work area and prepare and lay out equipment and materials to ensure efficient processes and timely completion of work
2. Set up machines
  • 2.1 Check that emergency stops, gauges, guards, controls and safety equipment are functional prior to machine start-up
  • 2.2 Complete machine settings and adjust to meet task requirements in compliance with manufacturer instructions
  • 2.3 Complete trial runs to check that machine is fully functional and that finished work meets task accuracy and quality requirements
  • 2.4 Make adjustments to machine settings to meet task quality and efficiency requirements
3. Operate machine
  • 3.1 Carry out pre-start checks on equipment in accordance with workplace practices
  • 3.2 Feed material into machine in accordance with manufacturer instructions, safe handling procedures and workplace practices
  • 3.3 Operate machine in accordance with its designed capacity and purpose and manufacturer specifications using required safety equipment and PPE
  • 3.4 Monitor machine operation to ensure product quality and efficient output
  • 3.5 Check waste quantities and make adjustments to minimise waste
  • 3.6 Identify items that do not meet quality requirements and recycle or discard in accordance with workplace procedure
  • 3.7 Record and report machining process and equipment faults to appropriate personnel
4. Complete operator maintenance
  • 4.1 Follow equipment lock-out procedures in accordance with work health and safety legislation and workplace practices
  • 4.2 Check cutting tools and remove and replace if blunt or damaged following workplace practices and manufacturer specifications
  • 4.3 Keep machining area clear of dust, off-cuts and debris in accordance with work health and safety requirements
5. Clean up work area and maintain equipment
  • 5.1 Clean work area, safely dispose of rubbish and identify items for recycling in accordance with workplace procedures and environmental standards
  • 5.2 Maintain and store equipment in accordance with manufacturer specifications and workplace practices
  • 5.3 Identify, tag and report faulty equipment in accordance with workplace procedures
  • 5.4 Complete job documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI253 MSFBA2002 Set up, operate and maintain blinds and awnings sector static machines Unit of competency
State Code National Code Title Type
BIJ6 MSF20122 Certificate II in Furnishing Qualification