Unit of competency Outline

Date retreived
22/07/2026 11:38 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Restore bicycles

Restore bicycles

Unit of competency
National Code
AURBTA005
State Code
AXE51
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to restore a used or vintage bicycle to original condition and full function. It involves preparing for the work, selecting and using specialist tools and equipment, selecting and matching bicycle components, identifying any required external services, dismantling, reassembling, adjusting and testing the bicycle, and completing workplace processes and documentation.It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for bicycle restoration
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Bicycle type, make and model are identified
  • 1.3 Bicycle specifications and original components are located
  • 1.4 Suppliers of new or used original components are identified and sourced
  • 1.5 Work is planned to minimise component damage and waste, and use time efficiently
2. Inspect bicycle
  • 2.1 Bicycle systems and components are inspected for faults and worn or damaged components, and measurements are taken as required
  • 2.2 Original bicycle condition and specifications are compared with job requirements
  • 2.3 Replacement and repair options for bicycle components, including parts and labour outsourcing, are identified
  • 2.4 Required restoration work and associated cost are documented and customer approval is obtained
3. Dismantle bicycle
  • 3.1 Hazards associated with the work are identified and risks are managed
  • 3.2 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 3.3 Work area is prepared and materials are selected according to job requirements
  • 3.4 Bicycle is dismantled and components are tagged according to workplace procedures and safety and environmental requirements
4. Restore bicycle
  • 4.1 Individual components are repaired as necessary according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 4.2 Work that cannot be carried out is outsourced as required
  • 4.3 Repaired and replaced bicycle components and accessories are reassembled, fitted to the bicycle with correct fastener tensions, and lubricated and adjusted according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 4.4 Assembled bicycle is inspected and tested for correct tension of components and operation, and adjusted as required according to workplace procedures
5. Complete work processes
  • 5.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 5.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF045 AURBTA3005 Restore bicycles Unit of competency