Unit of competency Outline

Date retreived
22/07/2026 1:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace clutch assemblies

Remove and replace clutch assemblies

Unit of competency
National Code
AURTTX013
State Code
WI947
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/01/2015
View on TGA
State Implementation and Classification
Approved Date
26/06/2015
Field of Education
030503 - Vehicle Mechanics
Original Release Date
26/06/2015
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove and replace the clutch assembly of a vehicle. It requires the learner to plan and prepare the task; remove the clutch assembly and inspect it and its associated components; replace the clutch assembly and check the clutch operation; and maintain the work area, tools and equipment.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace clutch assembly
  • 1.1 Safety and environmental requirements are sourced and interpreted
  • 1.2 Task instruction is interpreted and clutch assembly to be worked on is identified
  • 1.3 Manufacturer specifications and workplace procedures for clutch assembly removal and replacement are sourced and interpreted
  • 1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • 1.5 Tools and equipment required for removing and replacing clutch assembly are identified according to manufacturer specifications
2. Remove clutch assembly
  • 2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
  • 2.2 Clutch assembly is removed according to workplace procedures and safety and environmental requirements, and without causing damage to components, tools or equipment
  • 2.3 Clutch components are identified and inspected according to manufacturer specifications
  • 2.4 Clutch assembly component inspection results are recorded
3. Replace clutch assembly
  • 3.1 Clutch assembly components are prepared for assembly
  • 3.2 Clutch is replaced according to safety and environmental requirements, workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
  • 3.3 Clutch assembly finger height is measured and compared to manufacturer specifications
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and clutch assembly is presented ready for use or storage according to workplace procedures
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  • 4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
No information