Unit of competency Outline

Information current as of
21/10/2026 1:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rectify assembly faults

Rectify assembly faults

Unit of competency
National Code
AUMATA005
State Code
WH904
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
35
Field of Education
030503 - Vehicle Mechanics
Description
This unit describes the performance outcomes required to rectify assembly faults based on recommendations from vehicle inspection and test reports.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan and prepare work
  • 1.1 Work order and work instructions, inspection reports and specifications are obtained and confirmed
  • 1.2 Tools, equipment and materials required for the job are selected and inspected for safe operation and quality
2. Locate and rectify faults
  • 2.1 Workplace procedures are identified and followed
  • 2.2 Faults are located and diagnosed, and correction method is planned
  • 2.3 Replacement materials are identified, obtained and prepared according to inspection reports
  • 2.4 Rectification activities are carried out according to vehicle specifications
  • 2.5 Faults are re-diagnosed to ensure they have been rectified and final adjustments are made
3. Complete work processes
  • 3.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • 3.2 Tools and equipment are cleaned, checked and stored according to workplace procedures
  • 3.3 Faulty tools and equipment are identified, tagged and reported
  • 3.4 Repair inspection reports and work sheets are completed according to workplace procedures
No information
No information
No information