Unit of competency Outline

Date retreived
22/07/2026 10:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and apply blinds and awnings hardware and fixings

Select and apply blinds and awnings hardware and fixings

Unit of competency
National Code
MSFBA2003
State Code
WI254
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
20
Description
This unit of competency covers selecting hardware and other fixings in the manufacture and installation of blinds and awnings. It applies in workplace and on-site environments and may be conducted in small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices are identified and followed
  • 1.2 Personal protective equipment is used correctly throughout the work
  • 1.3 Types of hardware and fixings are identified and selected for the work
  • 1.4 Tools and equipment for application are identified and checked for safe operation
2 Apply and/or fit and finish
  • 2.1 Hardware items are laid out ready for application
  • 2.2 Hardware and fixings are applied as required according to work instructions and workplace practices
  • 2.3 Work is checked against required quality standards
3 Finalise operation and maintain equipment
  • 3.1 Work area is cleaned and waste removed
  • 3.2 Unused hardware is collected and stored for re-use or disposal following workplace practices
  • 3.3 Waste and scrap materials are dealt with following workplace practices
  • 3.4 Hand and power tools and equipment are cleaned, maintained and stored in accordance with workplace practices
  • 3.5 Machinery is cleaned and left in safe mode
  • 3.6 Faulty and/or defective equipment is tagged and reported to appropriate personnel
  • 3.7 Workplace documentation in completed
No information
No information
Replaces
State Code National Code Title Type
W8470 LMFBA2004A Select and apply blinds and awnings hardware and fixings Unit of competency
Replaced By
State Code National Code Title Type
OBP24 MSFBA2011 Select and apply hardware and fixings for blinds, awnings, screens and grilles Unit of competency