Unit of competency Outline

Date retreived
22/07/2026 9:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Calibrate and maintain scanning equipment used in sawmilling operations

Calibrate and maintain scanning equipment used in sawmilling operations

Unit of competency
National Code
FWPCOT3292
State Code
OBM37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030305 - Materials Engineering
Original Release Date
29/05/2020
Nominal Hours
65
Description
This unit of competency describes the skills and knowledge required to calibrate, adjust and test different forms of scanning equipment used in sawmilling operations, including optical (1-3 dimension), X-ray, microwave, multispectral and acoustic scanning equipment. It includes working safely, identifying the capability of scanning equipment in detecting timber characteristics and defects, following calibration procedures, and reporting on calibration outcomes. The unit applies to individuals who calibrate different forms of scanning equipment used in sawmilling operations.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to calibrate scanning equipment
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with working with scanning equipment
  • 1.4 Identify and implement workplace procedures for minimising waste material and maximising energy efficiency
  • 1.5 Obtain tools, equipment and testing devices needed for the work, and check for correct operation and safety
2. Calibrate scanning equipment
  • 2.1 Identify capability and resolution of scanning equipment in detecting timber characteristics and defects
  • 2.2 Identify calibration procedures and calibration points for scanning equipment
  • 2.3 Identify and take into account factors that may impact on the accuracy of scanning equipment during the calibration process
  • 2.4 Test and adjust scanning equipment as necessary to ensure equipment meets calibration requirements
  • 2.5 Carry out calibration of scanning equipment efficiently without waste of materials or damage to apparatus, the surrounding environment or services, and using sustainable energy principles
3. Verify calibration outcome
  • 3.1 Conduct a test for a benchmark object (the standard) to confirm accuracy and desired outcome from the process
  • 3.2 Repeat calibration procedure if accuracy is not achieved
  • 3.3 Record all calibration data accurately according to workplace and manufacturer requirements
4. Complete calibration activities
  • 4.1 Document calibration status and report out-of-calibration scanning equipment
  • 4.2 Lock out calibration scanning equipment according to workplace and safety requirements
  • 4.3 Perform routine maintenance of scanning equipment according to workplace and manufacturer instructions
  • 4.4 Clean work area according to workplace and safety requirements
No information
No information
No information