Unit of competency Outline
Date retreived
22/07/2026 3:44 PM AWST
22/07/2026 3:44 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Block and shape millinery by hand
Block and shape millinery by hand
Unit of competency
National Code
LMTML2007A
LMTML2007A
State Code
W7414
W7414
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
17/03/2009
Field of Education
030107 - Garment Making
Original Release Date
17/03/2009
Nominal Hours
30
Description
This unit covers the skills and knowledge required to perform blocking and shaping processes of millinery using manual operations, it includes selecting and modifying the block where applicable.
Notes
Elements and Performance Criteria
1 Confirm design
- 1.1 Blocking and shaping requirements are confirmed to ensure correct design application
2 Obtain and prepare materials
- 2.1 Selected materials are assembled in readiness for preparation process
- 2.2 Materials are prepared in readiness for shaping the hat, including stiffening if required
3 Select and modify the block
- 3.1 Block is selected to suit design
- 3.2 Block is adapted, where necessary, to ensure correct application
4 Block millinery
- 4.1 Fibre or material is prepared and processed over steam vent ensuring safe processes are followed
- 4.2 Hood is pre-blocked to pre-stretch the fibres, if required
- 4.3 Final blocking is performed to shape the secondary components, including brim, collar line or to obtain particular indentation
- 4.4 Hood is allowed to dry on the block, either naturally or by artificial means
- 4.5 Stiffening is added to the hat, where required, before being removed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machines and equipment may include
block
steamer
pins
cord
hot block
iron
hat stretcher
cutting tools
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machines and equipment may include
block
steamer
pins
cord
hot block
iron
hat stretcher
cutting tools
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
prepare and handle materials
use blocks appropriately
operate machines or equipment, including steam equipment, which are relevant to the competency and used within the enterprise
recognise non-conforming outcomes
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
prepare and handle materials
use blocks appropriately
operate machines or equipment, including steam equipment, which are relevant to the competency and used within the enterprise
recognise non-conforming outcomes
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2718 | LMTPRHM01AA | Block and shape headwear by hand - 1 | Unit of competency |
| AXP76 | LMTPRHM01BA | Block and shape headwear by hand - 2 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV12 | MSTML2007 | Block and shape millinery by hand | Unit of competency |
