Unit of competency Outline
Date retreived
22/07/2026 8:59 AM AWST
22/07/2026 8:59 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble springs for mattresses
Assemble springs for mattresses
Unit of competency
National Code
LMFMB3001B
LMFMB3001B
State Code
W8702
W8702
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/09/2008
Nominal Hours
20
Description
This unit covers the competency to assemble springs for mattresses and bases.
Notes
Elements and Performance Criteria
1. Plan work operations
- 1.1. Specifications for assembly of springs are confirmed, including:
- 1.2. number of springs for size of mattress
- 1.3. type of springs for application
- 1.4. layout of springs
- 1.5. assembly procedures
- 1.6. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.7. Suitable work area is selected, tidied and cleared of any contaminants
- 1.8. Appropriate equipment and tools are selected and checked for the required fitting and assembly process
2. Operate machinery to assemble spring units
- 2.1. Machine is checked for safe and effective operation.
- 2.2. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
- 2.3. Machine start up procedures are carried out in accordance with manufacturer instructions
- 2.4. Machine is operated in accordance with its designated capacity and purpose, tooling requirements and to manufacturer recommendations
- 2.5. Springs are machine joined in accordance with manufacturer instructions, safe handling procedures and standard workplace operating procedures
- 2.6. Machine operation is monitored to ensure springs are assembled to job specifications and quality requirements
- 2.7. Problems with the required work and/or operation of the machine are identified and reported to the appropriate person
3. Clean up work area and maintain equipment
- 3.1. Items that do not meet quality requirements are recycled or discarded according to workplace procedures
- 3.2. Materials that can be reused are collected and stored
- 3.3. Waste and scrap is removed following workplace procedures
- 3.4. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
- 3.5. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
- 3.6. Equipment and tooling is maintained in accordance with workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving the assembly of springs for mattresses and bases
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislation obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the assembly of springs
Work will be performed in workplaces which are involved in the manufacture and/or restoration of mattresses and bases
Tools and equipment may include, but are not limited to:
long nose pliers
spring coiling machine or spring assembly machine
Materials to be applied may include, but are not limited to:
coil springs
spiral springs
border wire
stabilising springs
grid wire
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices.
Information and procedures
Workplace procedures to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures/relating relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving the assembly of springs for mattresses and bases
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislation obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the assembly of springs
Work will be performed in workplaces which are involved in the manufacture and/or restoration of mattresses and bases
Tools and equipment may include, but are not limited to:
long nose pliers
spring coiling machine or spring assembly machine
Materials to be applied may include, but are not limited to:
coil springs
spiral springs
border wire
stabilising springs
grid wire
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices.
Information and procedures
Workplace procedures to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures/relating relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order, locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify and select materials used and any special handling requirements for those materials
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Produce and assemble a spring unit using border wire, stabilising springs and coil springs
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate equipment and tools, springs, work order, workplace information, including work procedures and equipment instructions.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order, locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify and select materials used and any special handling requirements for those materials
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Produce and assemble a spring unit using border wire, stabilising springs and coil springs
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate equipment and tools, springs, work order, workplace information, including work procedures and equipment instructions.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0346 | LMFMB3001A | Assemble springs for mattresses | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI575 | MSFMB2004 | Assemble springs for mattresses | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W035 | LMF30702 | Certificate III in Mattress and Base Making | Qualification |
| W025 | LMF20502 | Certificate II in Mattress and Base Making | Qualification |