Unit of competency Outline
Date retreived
22/07/2026 7:44 PM AWST
22/07/2026 7:44 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce prints
Produce prints
Unit of competency
National Code
CUVVSP45B
CUVVSP45B
State Code
D1762
D1762
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
100301 - Fine Arts
Original Release Date
19/09/2008
Nominal Hours
50
Description
This unit describes the skills and knowledge required to produce prints through the exploration and application of a range of techniques, tools, equipment and materials. As such the range of techniques could be quite varied and broad in nature. It is a specialisation unit and refers to a specific art form. This work would usually be carried out under limited supervision.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.
Notes
Elements and Performance Criteria
1 Prepare and maintain resources for the production of prints.
- 1.1 Correctly identify and select tools, equipment and materials required for the production of prints.1.2 Prepare, clean and maintain tools, equipment and materials in accordance with relevant workplace procedures and safety requirements.1.3 Organise and maintain work space so that it remains clean and safe.1.4 Store tools, equipment and materials in accordance with relevant workplace and safety requirements.
2 Explore printmaking techniques to plan work.
- 2.1 Assess the capabilities of techniques, tools, equipment and materials for different types of prints.2.2 Use and/or combine different techniques, tools, equipment and materials to determine and extend capabilities.2.3 Determine the conceptual vision for the proposed prints based on exploration of different techniques or from supplied information.2.4 Establish criteria for the selection of techniques to meet the conceptual vision.2.5 Select techniques based on the conceptual vision.2.6 Plan work, identifying work processes and resource requirements.
3 Realise prints.
- 3.1 Organise the resources required for the production of the proposed prints based on the plan of work.3.2 Safely use and adapt techniques, tools, equipment and materials appropriately to realise the conceptual vision.3.3 Identify potential different approaches that may enhance the final work and incorporate these into the work process.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Tools and equipment may include:
equipment for paper preparation and handling, e.g. soaking tray, preparation tables, scissors, knives, cutting blades, rulers drying racks and boards
lithography stones and plates
plate grainer
printing tools and equipment, e.g. presses, blankets, cardboards, burnishers, barens, screens, squeegees, vacuum tables
protective clothing
tools and equipment for applying colour and tone, e.g. rollers, brushes sponges, scrapers
tools and equipment for plate preparation, e.g. cutting tools, metal scribes, burnishers, scrapers, roulettes, found tools, brushes, sponges, acid trays, aquatint equipment, dryers.
Materials may include:
materials for block preparation, e.g. sand paper, steel wool, polishing liquids, plate grounds, etching acids, gum, carborundum, rosin, sugar lift, carbon paper, tusche, crayons
materials for block/plate making, e.g. lino, wood, copper, zinc, aluminium, perspex, plaster, cardboard
materials for printing, e.g. water and oil based inks, oil paints, water colour, pigments, chine colle papers, protective papers, tarlatan, rages
substrate materials, e.g. papers (handmade, commercial, found), e.g. cardboard, fabric, perspex.
Prints may be:
artists books
editions
installation work
series
unique states.
Workplace procedures may relate to such things as:
cost control
process-specific procedures
recycling
reporting
safety
use of materials.
Safety requirements would be in accordance with:
Federal, State and Territory legislation, regulations and standards.
Organisation and maintenance of the work space may relate to:
bench space
light
presses
process-specific requirements
ventilation
wet and dry areas.
Assessing the capabilities of the techniques, tools and materials may involve:
experimenting directly with work in progress
producing test pieces or samples
systematically testing a range of processes.
Within this unit the candidate would generally extend, build upon and combine a range of printmaking techniques, which may include:
collograph
dry point
intaglio
lithography
mezzotint
monotype
photocopy transfer
relief (lino block, wood block, perspex)
screen
wood.
Extending capabilities of techniques refers to:
exploring the potential of techniques and discovering new ways of using techniques.
The conceptual vision may be determined by:
elements and principles of design
the relationship of the work to a theoretical and historical context
the subject matter or theme for the prints, e.g. the body; identity; land and place; political, cultural, social issues; spiritual concerns.
Criteria for the selection of techniques may relate to:
access to materials, tools and equipment for the techniques
consistency with the conceptual vision for the proposed prints
ease of application of the techniques
personal affinity with the techniques.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Tools and equipment may include:
equipment for paper preparation and handling, e.g. soaking tray, preparation tables, scissors, knives, cutting blades, rulers drying racks and boards
lithography stones and plates
plate grainer
printing tools and equipment, e.g. presses, blankets, cardboards, burnishers, barens, screens, squeegees, vacuum tables
protective clothing
tools and equipment for applying colour and tone, e.g. rollers, brushes sponges, scrapers
tools and equipment for plate preparation, e.g. cutting tools, metal scribes, burnishers, scrapers, roulettes, found tools, brushes, sponges, acid trays, aquatint equipment, dryers.
Materials may include:
materials for block preparation, e.g. sand paper, steel wool, polishing liquids, plate grounds, etching acids, gum, carborundum, rosin, sugar lift, carbon paper, tusche, crayons
materials for block/plate making, e.g. lino, wood, copper, zinc, aluminium, perspex, plaster, cardboard
materials for printing, e.g. water and oil based inks, oil paints, water colour, pigments, chine colle papers, protective papers, tarlatan, rages
substrate materials, e.g. papers (handmade, commercial, found), e.g. cardboard, fabric, perspex.
Prints may be:
artists books
editions
installation work
series
unique states.
Workplace procedures may relate to such things as:
cost control
process-specific procedures
recycling
reporting
safety
use of materials.
Safety requirements would be in accordance with:
Federal, State and Territory legislation, regulations and standards.
Organisation and maintenance of the work space may relate to:
bench space
light
presses
process-specific requirements
ventilation
wet and dry areas.
Assessing the capabilities of the techniques, tools and materials may involve:
experimenting directly with work in progress
producing test pieces or samples
systematically testing a range of processes.
Within this unit the candidate would generally extend, build upon and combine a range of printmaking techniques, which may include:
collograph
dry point
intaglio
lithography
mezzotint
monotype
photocopy transfer
relief (lino block, wood block, perspex)
screen
wood.
Extending capabilities of techniques refers to:
exploring the potential of techniques and discovering new ways of using techniques.
The conceptual vision may be determined by:
elements and principles of design
the relationship of the work to a theoretical and historical context
the subject matter or theme for the prints, e.g. the body; identity; land and place; political, cultural, social issues; spiritual concerns.
Criteria for the selection of techniques may relate to:
access to materials, tools and equipment for the techniques
consistency with the conceptual vision for the proposed prints
ease of application of the techniques
personal affinity with the techniques.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit in this unit
The following evidence is critical to the judgement of competence in this unit:
production of prints which demonstrates a command of selected techniques and which is consistent with the conceptual vision
knowledge of materials and tools and how they are used and extended in printing.
Context of and specific resources for assessment
The assessment context must provide for:
evaluation of visual language and technical execution of work pieces produced by the candidate
practical demonstration of skills using required tools, equipment and materials to produce multiple prints or a single major work.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
direct observation of work in progress
questioning and discussion of the candidate's intentions and work outcome
verbal and written reports
review of portfolios of evidence
third party workplace reports of performance by the candidate.
Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Assessment of this unit requires access to the materials, resources and equipment needed to learn and extend printmaking techniques and practise them safely.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit in this unit
The following evidence is critical to the judgement of competence in this unit:
production of prints which demonstrates a command of selected techniques and which is consistent with the conceptual vision
knowledge of materials and tools and how they are used and extended in printing.
Context of and specific resources for assessment
The assessment context must provide for:
evaluation of visual language and technical execution of work pieces produced by the candidate
practical demonstration of skills using required tools, equipment and materials to produce multiple prints or a single major work.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
direct observation of work in progress
questioning and discussion of the candidate's intentions and work outcome
verbal and written reports
review of portfolios of evidence
third party workplace reports of performance by the candidate.
Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Assessment of this unit requires access to the materials, resources and equipment needed to learn and extend printmaking techniques and practise them safely.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| C6564 | CUVVSP45A | Produce prints | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7733 | CUVPRI301A | Produce prints | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| C624 | CUV30103 | Certificate III in Visual Arts and Contemporary Craft | Qualification |