Unit of competency Outline

Date retreived
22/07/2026 6:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install fire-rated masonry construction

Install fire-rated masonry construction

Unit of competency
National Code
CPCCBL3014
State Code
OCM71
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030905 - Building Services Engineering
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit specifies the skills and knowledge required to install fire-rated masonry construction. It includes laying fire resistant masonry to buildings, walls and service openingsThis unit applies to bricklayers and block layers who work on new and existing structures. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work.
  • 1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 1.2 Read, interpret and apply fire-rated masonry construction requirements from current plans, specifications, standards and codes.
  • 1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures.
  • 1.4 Identify fire resistance level (FRL), location and composition of masonry wall.
  • 1.5 Use measurements and apply formulas to calculate material quantities.
  • 1.6 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.7 Identify potential hazards and determine and implement control measures.
  • 1.8 Select and check condition of plant, equipment and tools and report damage or malfunction to relevant person.
  • 1.9 Check conformity of materials against the specifications and place materials in preparation for the work.
2 Construct masonry wall.
  • 2.1 Set out and mark position, gauge and bond of masonry wall.
  • 2.2 Mix mortar and check consistency with job requirements.
  • 2.3 Construct fire-rated masonry wall maintaining bond, gauge and level to the set-out height.
  • 2.4 Remove excess mortar, rake or rule joints to specified profile and depth.
  • 2.5 Clean and brush down face of brickwork prior to mortar drying.
3 Clean up.
  • 3.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 3.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 3.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9333 CPCCBL3014A Install fire-rated masonry construction Unit of competency
State Code National Code Title Type
BGD8 CPC33020 Certificate III in Bricklaying and Blocklaying Qualification