Unit of competency Outline

Date retreived
22/07/2026 9:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and control solids handling processes

Operate and control solids handling processes

Unit of competency
National Code
NWPTRT091
State Code
AVX93
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/04/2016
Nominal Hours
20
Description
This unit describes the skills required to monitor, operate and control water and wastewater dewatering and sludge thickening plant and to measure and report on system performance and process quality control. The ability to identify faults, determine and apply technical adjustments andconduct chemical dosing procedures is essential to performance.This unit applies to those working as operational staff with a specific responsibility for water and/or wastewater dewatering and sludge thickening processes in a treatment plant. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those relating to storing and handling dangerous goods and chemicals and WHS. Those undertaking this unit would work under supervision, while performing routine tasks within a familiar context.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Monitor dewatering process performance
  • 1.1 Monitor test results and processes to maintain the parameters of operation.
  • 1.2 Identify and report process faults and the operational condition of plant.
2. Control chemical use
  • 2.1 Use, handle and store chemicals.
  • 2.2 Determine and carry out chemical dosing.
  • 2.3 Maintain chemical supply and usage records.
  • 2.4 Select, fit and use required safety equipment, including personal protective equipment.
3. Operate and control dewatering processes
  • 3.1 Carry out routine plant inspections.
  • 3.2 Conduct and analyse process tests and determine performance against plant operational requirements.
  • 3.3 Make integrated process adjustments to optimise system performance.
  • 3.4 Collect, interpret and record process data.
4. Complete documentation
  • 4.1 Compile reports from plant and system data.
  • 4.2 Report observations outside defined parameters for further action.
No information
No information
Replaces
State Code National Code Title Type
D1935 NWP360B Monitor, operate and control dewatering processes Unit of competency
Replaced By
State Code National Code Title Type
OBN52 NWPTRT039 Operate and control solids handling processes Unit of competency
State Code National Code Title Type
AYW9 NWP30315 Certificate III in Water Industry Treatment Qualification