Unit of competency Outline
Date retreived
23/07/2026 4:55 AM AWST
23/07/2026 4:55 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Verify new software and hardware releases
Verify new software and hardware releases
Unit of competency
National Code
ICTTEN6094A
ICTTEN6094A
State Code
D3500
D3500
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
12/06/2014
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
12/06/2014
Nominal Hours
120
Description
This unit describes the performance outcomes, skills and knowledge required to verify compliance and compatibility of software and hardware to an existing system.Installation may be new software and hardware releases for an existing system or new infrastructure for convergence to Next Generation Networks NGN).No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement but users should confirm requirements with the relevant federal, state or territory authority.
Notes
Elements and Performance Criteria
1. Plan the testing of new software releases
- 1.1. Obtain manuals, specifications and instructions associated with new releases and identify areas of uncertainty for confirmation with the vendor
- 1.2. Plan the testing environment of the software release and likely impact with network management centre
- 1.3. Determine resources required to assist with the test and negotiate their availability
- 1.4. Determine and plan outage and notify network management centre as required
- 1.5. Notify customers of impact on the network during the test
- 1.6. Develop contingency plans to cater for likely problems during the test
2. Test software and hardware units
- 2.1. Load new software and conduct tests using appropriate test equipment according to vendor specifications
- 2.2. Evaluate test results to assess functionality and features of software and hardware according to vendor documentation
- 2.3. Test compatibility with existing network and take corrective action with vendor as required
- 2.4. Implement contingency plans in conjunction with network management if integrity of the network is compromised by the new release
3. Undertake administrative work
- 3.1. Document test results and store according to enterprise policy
- 3.2. Discuss ongoing or likely problems with the vendor and initiate follow up arrangements to ensure a permanent solution
- 3.3. Provide clearance for software and hardware release to be put in service in the system according to enterprise procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Testing environment may include:
live as a pilot
simulated controlled environment
staged
variables:
availability of suitable location for testing
compatibility of existing software and hardware
nature of the release
operational environment involved
risks and uncertainty involved.
Tests may include:
error check
full system
load testing of new system
performance
software performance using independent third party software
switching
traffic flow
transmission
transmitter power.
Test equipment may include:
communication testers
network manager
protocol analyser
transmission measuring sets.
Compatibility may include affect on:
network
network management tools
new vendor network elements.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Testing environment may include:
live as a pilot
simulated controlled environment
staged
variables:
availability of suitable location for testing
compatibility of existing software and hardware
nature of the release
operational environment involved
risks and uncertainty involved.
Tests may include:
error check
full system
load testing of new system
performance
software performance using independent third party software
switching
traffic flow
transmission
transmitter power.
Test equipment may include:
communication testers
network manager
protocol analyser
transmission measuring sets.
Compatibility may include affect on:
network
network management tools
new vendor network elements.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
develop a plan for testing new software releases including functionality and performance under load conditions
develop a contingency plan recognising potential causes of problems and impact on service levels
test compatibility of software and hardware with existing system
analyse impact of integration of new hardware and software release on the network and make recommendations for improvement.
Context of and specific resources for assessment
Assessment must ensure:
a system to verify compliance and compatibility of software and hardware
test equipment currently used in industry
systems manuals, vendor specifications and enterprise policy.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate testing compatibility of software and hardware with existing system and analysing problems arising
review of test regime, including test results with analysis and improvement recommendations prepared by the candidate
review of contingency plan prepared by candidate
oral or written questioning of the candidate to assess knowledge of test methods, performance and integration requirements.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICTTEN6045A Implement planned network changes with minimal impact to the customer.
Aboriginal people and other people from a non-English speaking background may have second language issues.
Access must be provided to appropriate learning and assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.
Where applicable, physical resources should include equipment modified for people with special needs.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
develop a plan for testing new software releases including functionality and performance under load conditions
develop a contingency plan recognising potential causes of problems and impact on service levels
test compatibility of software and hardware with existing system
analyse impact of integration of new hardware and software release on the network and make recommendations for improvement.
Context of and specific resources for assessment
Assessment must ensure:
a system to verify compliance and compatibility of software and hardware
test equipment currently used in industry
systems manuals, vendor specifications and enterprise policy.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate testing compatibility of software and hardware with existing system and analysing problems arising
review of test regime, including test results with analysis and improvement recommendations prepared by the candidate
review of contingency plan prepared by candidate
oral or written questioning of the candidate to assess knowledge of test methods, performance and integration requirements.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICTTEN6045A Implement planned network changes with minimal impact to the customer.
Aboriginal people and other people from a non-English speaking background may have second language issues.
Access must be provided to appropriate learning and assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.
Where applicable, physical resources should include equipment modified for people with special needs.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWC95 | ICTTEN608 | Verify new software and hardware releases | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W817 | ICT60110 | Advanced Diploma of Optical Networks | Qualification |