Unit of competency Outline

Date retreived
22/07/2026 1:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use canvas and sail production tools

Use canvas and sail production tools

Unit of competency
National Code
LMTTF2018A
State Code
W7476
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
24/10/2014
Nominal Hours
20
Description
This unit covers the skills and knowledge required to safely use a range of commonly used hand and power tools in the manufacture of canvas and sail products.
Notes
Elements and Performance Criteria
1 Determine tool requirements and select tools
  • 1.1 Nature of work to be performed is determined including processes to be performed, materials to be used and working environment in which tools are to be used
  • 1.2 Appropriate tools are selected for the work tasks to be performed
  • 1.3 Workplace procedures and instructions are read and interpreted
2 Check tools and set for use
  • 2.1 Tools are inspected for damage, missing components or other defects prior to use
  • 2.2 Extension power cables and gas/air hoses for power tools are checked for knots and insulation damage and are adequately supported when used overhead
  • 2.3 Tool bits, blades, etc. are installed in tool
  • 2.4 Tool settings are determined and tool is adjusted or set for use
3 Prepare work area for tool use
  • 3.1 Safe working environment for tool use is established, including elimination of solvents and other sources of flammable or explosive vapours and removal of flammable materials which might catch fire if tools likely to produce sparks or flame are used
  • 3.2 Work with tools is planned to maximise safety and productivity
  • 3.3 Suitable electrical power outlets, if required, are identified
  • 3.4 Work area is cleared and cleaned to provide work table or benches free of obstructions and allow clear access to machines and equipment
  • 3.5 Barriers or screens are used to keep other personnel at a safe distance or to shield them from sparks, arc flashes, debris, dust or noise
  • 3.6 Suitable floor insulation or residual current devices are provided where electrical tools are to be used in conditions which could present a shock hazard
  • 3.7 Provision for emergency shut down of tool is checked
4 Prepare work piece for tool use
  • 4.1 Work piece is correctly mounted in, or aligned to the tool or machine to be used
  • 4.2 Work piece is securely anchored where necessary to prevent movement
5 Use tools
  • 5.1 Safety equipment is used in accordance with OHS practices and tools are used in accordance with industry and workplace OHS practices
  • 5.2 Electrical tools are safely connected to power supply, gas or air hoses are safely connected to gas/air supplies
  • 5.3 Start up and shut down procedures are safely followed when using electrical or gas operated tools
  • 5.4 Mechanical tool settings, electrical settings and gas pressures are set
  • 5.5 Tools are located in safe positions when not in use
  • 5.6 Safety equipment is used during tool operation in accordance with OHS practices
  • 5.7 Tool operation is monitored and use is discontinued if abnormal operation or other problems are detected
  • 5.8 Knowledge of tools are applied to preform required tasks
6 Maintain and store tools and maintain work area
  • 6.1 Tools, extension cables and hoses are cleaned and stored in accordance with industry and workplace OHS practices
  • 6.2 Abnormal tool operation or other problems are reported in accordance with established workplace practices
  • 6.3 Programmed maintenance of tools which is within the province of the operator is performed
  • 6.4 Work area is cleaned
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Materials may include
steel
aluminium
bronze
stainless steel
wood
plastic
canvas
Tools may include
hand tools such as:
measuring equipment
spanners
pliers
screwdrivers
knives
scissors
hacksaws
hammers
chisels
files
pop riveting machines
staple guns
lifting and hoisting equipment
air powered tools:
drills
air wrenches
spray guns
air nozzles
buffing machines
air compressors
gas burning tools such as:
oxy-acetylene welding equipment
butane or propane torches
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Electrical power tools may include
electric drills (bench and portable)
pop riveting machines
staple guns
sanders
angle grinders
bench grinders
electric shears and knives
heat lamps
arc welders
plastic welding machines
electric winches
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
comply with all relevant safety requirements applying to the use of hand, electrical, air, and gas energised tools
interpret work orders relevant to the selection and use of tools
interpret specifications and instructions relating to the materials and equipment on which the tools are to be used
prepare work environment for safe and effective tool use
set up tools for safe and effective use
shut down tools in an emergency
perform work processes with the tools
monitor tool operation for correct operation during use
inspect completed work to verify correct tool operation and use
document and communicate work related information including reporting of faults and other problems
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment

Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices.

Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
E0977 LMTPRTF13A Use power tools Unit of competency
Replaced By
State Code National Code Title Type
BAU66 MSTTF2003 Use canvas and sail production tools Unit of competency