Unit of competency Outline
Date retreived
22/07/2026 5:19 PM AWST
22/07/2026 5:19 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diagnose and rectify minor faults on on-track vehicles
Diagnose and rectify minor faults on on-track vehicles
Unit of competency
National Code
TLIB2130A
TLIB2130A
State Code
WG190
WG190
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/11/2014
Field of Education
039907 - Rail Operations
Original Release Date
04/11/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to diagnose and rectify minor faults on on-track vehicles in accordance with organisational requirements.Licensing, legislative, regulatory or certification requirements are not applicable to this unit.
Notes
Elements and Performance Criteria
1 Identify repair and maintenance requirements
- 1.1 Faulty or damaged components or equipment are identified and assessed for component exchange or minor repair
- 1.2 Identified faulty or damaged components outside own scope, as determined by organisational policies, are reported in accordance with organisational procedures
- 1.3 Where repair/maintenance/component exchange is appropriate, equipment and tools required are identified and obtained
- 1.4 Work areas and equipment are prepared and made safe for repair/maintenance/component exchange activities
2 Conduct repairs and minor maintenance
- 2.1 Routine repair/maintenance/component exchange is carried out in accordance with manufacturer specifications and organisational procedures
- 2.2 Equipment, tools and materials are operated, applied and handled in conformance to occupational health and safety (OH&S) requirements and manufacturer specifications to prevent injury and damage
3 Check and report minor repairs and/or maintenance
- 3.1 Minor repair/maintenance/component exchange activities are checked for compliance with manufacturer specifications and workplace procedures
- 3.2 Equipment is checked to confirm it has been restored to operational standards
- 3.3 Worksite is checked for cleanliness and operational safety, and appropriate action is taken to restore site and equipment
- 3.4 Repair/maintenance/component exchange activities are documented in accordance with organisational requirements
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Minor repair/maintenance/ component exchange may include:
minor component change out
diagnosing minor faults
identifying correct lubricants
identifying correct fuel and carrying out refuelling
identifying correct solvents and cleaning fluids
maintaining fluid and air pressures
replacing faulty/damaged/worn equipment
servicing and cleaning batteries
On-track vehicles may include:
rail crane
spot tamper
ballast regulator
inserter/remover (TR10)
track recorder
tamper
dynamic stabiliser
rail grinder
ballast cleaner
track layer
tie inserter
scarifier
tie cranes
track jack
Safety equipment may include:
high visibility clothing
gloves
safety headwear
respiratory protection
safety footwear
safety glasses
hearing protection
safety devices
Minor repair/maintenance/ component exchange may include:
minor component change out
diagnosing minor faults
identifying correct lubricants
identifying correct fuel and carrying out refuelling
identifying correct solvents and cleaning fluids
maintaining fluid and air pressures
replacing faulty/damaged/worn equipment
servicing and cleaning batteries
On-track vehicles may include:
rail crane
spot tamper
ballast regulator
inserter/remover (TR10)
track recorder
tamper
dynamic stabiliser
rail grinder
ballast cleaner
track layer
tie inserter
scarifier
tie cranes
track jack
Safety equipment may include:
high visibility clothing
gloves
safety headwear
respiratory protection
safety footwear
safety glasses
hearing protection
safety devices
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the required knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
identifying equipment checks required for a range of on-track vehicles in the workplace
identifying typical faults or defects that may occur on on-track vehicles
carrying out minor repairs, maintenance and component exchange on different on-track vehicles
following correct workplace requirements for reporting identified defects
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
demonstrating correct procedure for identifying minor faults
correctly changing out faulty component
reporting minor faults and complete organisational documentation
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including organisational procedures, regulations, codes of practice and operation manuals
Method of assessment
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment, and/or
in an appropriate range of situations in the workplace
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the required knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
identifying equipment checks required for a range of on-track vehicles in the workplace
identifying typical faults or defects that may occur on on-track vehicles
carrying out minor repairs, maintenance and component exchange on different on-track vehicles
following correct workplace requirements for reporting identified defects
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
demonstrating correct procedure for identifying minor faults
correctly changing out faulty component
reporting minor faults and complete organisational documentation
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including organisational procedures, regulations, codes of practice and operation manuals
Method of assessment
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment, and/or
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVK64 | TLIB2130 | Diagnose and rectify minor faults on on-track vehicles | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J534 | TLI22113 | Certificate II in Rail Track Vehicle Driving | Qualification |