Unit of competency Outline

Date retreived
22/07/2026 10:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce veneer from debarked logs

Produce veneer from debarked logs

Unit of competency
National Code
FWPWPP3201
State Code
AXJ40
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
30
Description
This unit of competency describes the outcomes required to operate a specialised peeling lathe or rotary slicer to produce sheets of timber veneer from debarked logs. Work is completed in a forest products factory setting and includes operator maintenance.The unit applies to production operators and technicians who produce veneer from debarked logs in a forest and wood products factory setting and includes operator maintenance.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for peeling
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.3 Obtain type and quantity of debarked logs for peeling or slicing.
  • 1.4 Plan veneer peeling or slicing process and thickness in line with work order.
2. Peel veneer
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Check suitability of log size and condition and load into lathe.
  • 2.3 Place drive logs to maximise available veneer and remove waste product.
  • 2.4 Set veneer peeling or slicing process for optimal veneer recovery and grading.
  • 2.5 Adjust machine speed and control of veneer cut to suit log characteristics.
  • 2.6 Dispose of defective material and log cores in line with environmental protection practices.
3. Complete operator maintenance
  • 3.1 Follow organisational safety procedures to lock out equipment.
  • 3.2 Check cutting blades for bluntness or damage.
  • 3.3 Remove and replace cutting blades in line with manufacturer's recommendations.
  • 3.4 Dispose of used blades in line with environmental protection practices.
  • 3.5 Keep machine clear of dust and debris in line with organisational safety procedures.
  • 3.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6116 FPIWPP3201B Produce veneer from debarked logs Unit of competency
Replaced By
State Code National Code Title Type
OFD08 FWPTMM3217 Develop knowledge of plywood or laminated veneer lumber production Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification