Unit of competency Outline

Date retreived
22/07/2026 8:42 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate exhaust systems and components

Fabricate exhaust systems and components

Unit of competency
National Code
AURTTS001
State Code
AXA30
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
24
Description
This unit describes the performance outcomes required to fabricate and test exhaust systems and their components. It involves preparing for the task, selecting procedures for fabrication, performing post-fabrication testing, and completing processes and documentation.It applies to those working in the automotive service and repair industry. The exhaust systems and components that are fabricated are for internal combustion engines.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to fabricate exhaust system component
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Fabrication procedures and information are sourced and interpreted
  • 1.3 Fabrication options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Appropriate tools and equipment are selected and checked for serviceability
2. Fabricate and test component
  • 2.1 Component material is selected and sourced according to job requirements
  • 2.2 Material is shaped, machined and welded as required using approved methods and equipment according to manufacturer specifications and safety requirements
  • 2.3 Component is measured to ensure compliance with specifications
  • 2.4 Component fabrication is completed according to manufacturer specifications and safety requirements, and without causing damage to any component or system
  • 2.5 Component is tested according to workplace procedures and job requirements
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and component is presented ready for use or storage according to workplace procedures
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored according to workplace expectations
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF442 AURTTS2001 Fabricate exhaust system and components Unit of competency
Replaced By
State Code National Code Title Type
OCL81 AURTTS101 Fabricate exhaust systems and components Unit of competency