Unit of competency Outline

Date retreived
22/07/2026 9:37 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect micro grid renewable energy systems

Inspect micro grid renewable energy systems

Unit of competency
National Code
UEERE0073
State Code
OEU59
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/12/2022
View on TGA
State Implementation and Classification
Approved Date
16/03/2023
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
16/03/2023
Nominal Hours
25
Description
This unit involves the skills and knowledge required to conduct compliance inspection of micro-grid renewable energy systems.It includes reviewing relevant industry/regulatory standards that must be complied with, preparing inspection checklist, conducting compliance inspection, and actioning and reporting on findings.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).Competency development activities in this unit are subject to regulations directly related to licensing.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Notes
Elements and Performance Criteria
1 Prepare to conduct micro-grid system compliance inspection
  • 1.1 WHS/OHS processes and procedures for work are identified and applied in accordance with workplace procedures
  • 1.2 Installation documentation and relevant industry/regulatory standards are reviewed and applied
  • 1.3 Inspection checklists are prepared in accordance with relevant industry standards and regulatory requirements
  • 1.4 Appropriate person/s is consulted to ensure the work is coordinated effectively with others
  • 1.5 Tools, equipment and testing devices to verify compliance are obtained and checked for operation and safety in accordance with workplace procedures
  • 1.6 Need to test and measure live electrical work is determined in accordance with WHS/OHS requirements and workplace procedures
2 Conduct compliance inspection of micro-grid renewable energy system
  • 2.1 Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.2 Inspection of the system is conducted against checklist in accordance with relevant industry standards and regulatory requirements
  • 2.3 Electrical equipment compliance with relevant safety requirements and industry standards is obtained from appropriate person/s
  • 2.4 Areas of compliance are verified, and non-compliance identified in accordance with relevant industry standards and regulatory requirements
3 Act and report on micro-grid system inspection findings
  • 3.1 Inspection findings are documented in accordance with relevant industry standards and regulatory requirements
  • 3.2 Actions for non-compliance within the scope of inspection responsibilities are determined in accordance with relevant industry standards and regulatory requirements
  • 3.3 Inspection report is completed and issued to appropriate person/s in accordance with relevant industry standards and regulatory requirements
No information
No information
No information
State Code National Code Title Type
AF112 UEESS00202 Micro-grid Renewable Energy Systems Inspector Skill Set Skill set