Unit of competency Outline

Date retreived
22/07/2026 5:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Shear goats

Shear goats

Unit of competency
National Code
AHCSHG207
State Code
BAP58
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
050103 - Wool Science
Original Release Date
12/01/2017
Nominal Hours
60
Description
This unit of competency describes the skills and knowledge required to catch, handle and shear goats.All work must be carried out to comply with workplace procedures, work health and safety, animal welfare and biosecurity requirements and sustainability practices.This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for own work. They identify and provide solutions to a limited range of predictable problems.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for shearing
  • 1.1 Check shearing equipment for correct operation prior to shearing session
  • 1.2 Identify, catch and move goats to be shorn
  • 1.3 Prepare shearing equipment in readiness for shearing operations
  • 1.4 Identify potential and existing hazards in the workplace and report to the supervisor
  • 1.5 Select, use and maintain suitable personal protective equipment
2. Perform shearing operations
  • 2.1 Position goat for shearing using identified positions and shear
  • 2.2 Use shearing methods that ensure that damage to the goat and fleece is minimised while meeting volume of shearing expectations
  • 2.3 Shear goats using safe and humane handling techniques at all times
  • 2.4 Comply with work health and safety and animal welfare requirements
3. Respond to complications
  • 3.1 Identify contamination during shearing operations and report to owner
  • 3.2 Treat cuts to goats as required
  • 3.3 Identify problem goats and report
4. Complete shearing operation
  • 4.1 Place fibre to avoid contamination and for collection by handlers
  • 4.2 Set handpiece to non-operational position and store
  • 4.3 Release goats safely from the board into the count-out pens
  • 4.4 Report shearing grievances and difficulties to supervisor
  • 4.5 Monitor and control environmental implications associated with shearing activities
  • 4.6 Follow enterprise biosecurity policies where required
No information
No information
Replaces
State Code National Code Title Type
D7217 AHCSHG207A Shear goats Unit of competency
State Code National Code Title Type
BCZ7 AHC20116 Certificate II in Agriculture Qualification