Unit of competency Outline

Date retreived
23/07/2026 2:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up the wireless capabilities of communications and data storage devices

Set up the wireless capabilities of communications and data storage devices

Unit of competency
National Code
UEENEEF007B
State Code
W7871
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/07/2011
View on TGA
State Implementation and Classification
Approved Date
12/06/2009
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
12/06/2009
Nominal Hours
36
Description
1)1.1) DescriptorThis unit covers entering instructions in wireless devices with simple built-in programming function and verifying that the device operates as intended. It encompasses safe working practices, checking device software installation, following written and oral instruction and procedures and completing necessary documentation.Note: Examples of wireless devices are personal digital assistants(PDAs), mobile phones, personal computers(PCs) remote controls etc
Notes
Elements and Performance Criteria
1 Prepare to enter operating instructions.
  • 1.1 OHS procedures for a given work area are identified, obtained and understood through established routines and procedures.
  • 1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
  • 1.3 Safety hazards that have not previously been identified are reported and advise on risk control measures are sought from the work supervisor.
  • 1.4 Work supervisor or customers are consulted to determine which functions of the device are to be use and the parameter of each.
  • 1.5 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
  • 1.6 Device installation is checked for compliance with job specification and regulations where they apply.
2 Enter operating instructions.
  • 2.1 Established OHS risk control measures and procedures for carrying out the work are followed.
  • 2.2 Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
  • 2.3 The required status of each function of the device is entered and their parameters set in accordance with manufactures programming instructions.
  • 2.4 Entered data are checked as meeting those specified by the work supervisor or customer.
  • 2.5 Procedures for referring non-routine events to immediate supervisor for directions are followed.
3 Test device operation and report.
  • 3.1 Device operation is tested in strict accordance OHS requirements and procedures.
  • 3.2 Operating anomalies are identified and corrected in accordance with established routines.
  • 3.3 OHS work completion risk control measures and procedures are followed.
  • 3.4 Work site is cleaned and made safe in accordance with established procedures.
  • 3.5 Work completion is reported and appropriate person(s) notified in accordance with established routines.
No information
No information
Replaced By
State Code National Code Title Type
WC463 UEENEEF107A Set up and configure the wireless capabilities of communications and data storage devices Unit of competency
No information