Unit of competency Outline

Date retreived
22/07/2026 5:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use electrical test equipment

Use electrical test equipment

Unit of competency
National Code
MEA260
State Code
AUE22
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
06/08/2015
View on TGA
State Implementation and Classification
Approved Date
22/07/2015
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
22/07/2015
Nominal Hours
20
Description
This unit of competency requires application of skills in the use of electrical test equipment to measure voltage, current, frequency and phase angle, and to test continuity, resistance, insulation and bonding.Applications include aircraft and components both in the hangar and workshop during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.The unit is part of all Avionic Certificate IV training pathways. It is also part of the Mechanical Aircraft Maintenance Engineer licensing pathway. The unit is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation safety Authority (CASA). Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen maintenance certification licence under Civil Aviation Safety Regulation (CASR) Part 66, in accordance with the licensing provisions in the Companion Volume Implementation Guide.
Notes
Elements and Performance Criteria
1. Select required test equipment
  • 1.1 System/component test requirements are identified
  • 1.2 Appropriate test equipment is selected
2. Prepare test equipment for use
  • 2.1 Test equipment is checked for serviceability and applicable leads are fitted where required
  • 2.2 Applicable function and range of measurement is selected as required
3. Test system or component
  • 3.1 Test points and polarity are determined
  • 3.2 Required parameters are measured with the test equipment while observing all relevant work health and safety (WHS) requirements
No information
No information
Replaces
State Code National Code Title Type
W8390 MEA260B Use electrical test equipment Unit of competency
Replaced By
State Code National Code Title Type
OAD00 MEA296 Use electrical test equipment in aviation maintenance activities Unit of competency