Unit of competency Outline

Date retreived
22/07/2026 3:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct wood weave-style blinds

Construct wood weave-style blinds

Unit of competency
National Code
MSFBA3007
State Code
WI268
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
56
Description
This unit of competency covers constructing wood weave-style blinds. It applies in a workplace environment and may be conducted in small to large scale enterprises No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Establish work requirements and prepare for work
  • 1.1 Work health and safety (WHS) requirements, legislative requirements, and workplace practices are observed throughout the work
  • 1.2 Personal protective equipment is selected and used
  • 1.3 Style of blind is identified from work order
  • 1.4 Tools and equipment are selected and checked for safe operation
  • 1.5 Materials are selected from stock and checked against work requirements
2 Lay out, mark and cut materials
  • 2.1 Material is laid out flat and square on a cutting bench large enough to take the full width of the wood and marked
  • 2.2 Material is cut
3 Construct blind
  • 3.1 Wood is woven to form skin of blind
  • 3.2 Head and bottom rails are attached to blind
  • 3.3 Cords are attached to blind
  • 3.4 Blind is finished according to work instructions
  • 3.5 Child safety mechanisms as required by legislation or code of practice are selected and attached
4 Apply quality checks
  • 4.1 Finished blinds are checked to ensure end finishing and final length of finished blinds match work requirements
  • 4.2 Finished blind is tested within limits of normal operation for correct operation and parts of the work that do not comply with work order are repaired or re-worked
5 Complete work
  • 5.1 Finished work is cleaned, packaged and stored following workplace practices
  • 5.2 Tools and equipment are cleaned, maintained and stored
  • 5.3 Faulty tools and equipment are reported to appropriate personnel
  • 5.4 Work area is cleaned and waste is disposed of in accordance with workplace practices and environmental legislation covering disposal of industrial waste
  • 5.5 Workplace documentation or reporting is completed
No information
No information
No information
State Code National Code Title Type
J737 MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles Qualification