Unit of competency Outline

Date retreived
23/07/2026 7:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Follow quality and product care procedures in forest and wood products operations

Follow quality and product care procedures in forest and wood products operations

Unit of competency
National Code
FWPCOT2264
State Code
ODS43
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
080317 - Quality Management
Original Release Date
21/06/2022
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to follow and monitor the quality procedures applying to own work and product output in the forest and wood products industry.The unit applies to individuals working in a broad range of roles and operations in the forest and wood products industry in which there is a focus on maintaining quality and product care.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation, standards and industry codes of practice that apply to the workplace.No licencing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for the work task
  • 1.1 Determine job requirements from work order or instruction, and where required check with appropriate personnel
  • 1.2 Confirm workplace quality system requirements and procedures related to work task
  • 1.3 Confirm forest or wood product specification requirements with appropriate personnel
  • 1.4 Confirm workplace safety and environmental protection procedures relevant to work task
  • 1.5 Identify, assess and take actions to mitigate hazards and associated risks related to the work task
  • 1.6 Establish and maintain communication with others while preparing to undertake and implementing work task
  • 1.7 Inspect and assess forest or wood products visually before processing or completion of handling
2. Follow forest or wood product care procedures during the work task
  • 2.1 Assess visual appearance of the processed forest or wood product and monitor product quality to ensure compliance with product specifications and quality standards and to minimise waste
  • 2.2 Identify problems associated with forest or wood product quality as they occur and promptly take remedial action or report problem to appropriate personnel
  • 2.3 Complete quality and product care reports according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXM06 FWPCOR2207 Maintain quality and product care Unit of competency