Unit of competency Outline

Date retreived
22/07/2026 7:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate new technology or process

Operate new technology or process

Unit of competency
National Code
MTMP2042C
State Code
D8801
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/07/2011
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
20
Description
This unit covers the skills and knowledge required to operate a new technology or process in a meat processing operation.
Notes
Elements and Performance Criteria
1. Prepare new equipment
  • 1.1. Equipment is prepared for operation in accordance with work instructions and manufacturer's specifications.
2. Operate equipment
  • 2.1. Equipment is operated or process is undertaken in accordance with work instructions.
  • 2.2. Equipment is operated or process is undertaken in accordance with Occupational Health and Safety (OH&S) requirements.
  • 2.3. Potential sources of contamination and cross-contamination are identified and preventative measures are employed.
3. Clean and maintain equipment and/or work area
  • 3.1. Performance of equipment is monitored and faults are reported either verbally or in writing in accordance with work instructions.
  • 3.2. Equipment and/or work area is cleaned and maintained to workplace requirements.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Workplace requirements may include:
enterprise-specific procedures
OH&S requirements
Quality Assurance (QA) requirements
standard operating procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Regulatory requirements may include:
Export Control Act
hygiene and sanitation requirements
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.

Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.

All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated in a processing environment and over a period of time.
Context of, and specific resources for assessment
Assessment tasks must be comprehensively customised to gather evidence specific to the new technology being implemented in a meat processing or retailing environment.
Method of assessment
Recommended methods of assessment include:
assignments
debriefs
quiz of underpinning knowledge
simulation
verified work log or diary
workplace demonstration
workplace project
workplace referee or third-party report of performance over time.

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaced By
State Code National Code Title Type
BBA47 AMPA2035 Operate new technology or process Unit of competency
State Code National Code Title Type
D595 MTM20111 Certificate II in Meat Processing (Abattoirs) Qualification