Unit of competency Outline

Date retreived
22/07/2026 7:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design structural/mechanical components

Design structural/mechanical components

Unit of competency
National Code
PMC556031
State Code
BAH10
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030701 - Mechanical Engineering
Original Release Date
05/08/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to design a new product/component which has a significant structural or mechanical requirement and which is to be made from manufactured mineral products. It applies to large and small components, such as:critical load bearing structural components requiring significant design, such as columns and beamscritical mechanical components transmitting power/forces, such as shafts, gears and bearingscomponent joints/joinscomponents with a critical rigidity/flexural specificationindividual componentsintegrated structural components.This unit of competency applies to advanced technologists, technical experts or those in similar roles who are required to apply significant depth and breadth of theoretical materials, product and process knowledge in order to determine the design requirements, select the materials to be used, design the components, supervise product testing/trials and finalise specifications for the new component. Where the design is being undertaken by a design team the technologist will perform a lead technical role. The technologist is not required to demonstrate 'hands on' operation of equipment as part of this competency. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine mechanical/structural design requirements
  • 1.1 Determine stress/strain requirements of end use
  • 1.2 Determine flexural/rigidity requirements of end use
  • 1.3 Determine required physical properties (such as size, shape and density) of end use
  • 1.4 Determine environmental requirements (physical, chemical and radiation) of end product
  • 1.5 Identify how component fits with entire end product
  • 1.6 Develop mechanical design brief and verify with appropriate people
2 Select materials and additives, including reinforcing, appropriate for the design brief
  • 2.1 Select material/combination of materials with appropriate physical properties
  • 2.2 Select material/combination of materials with appropriate chemical properties
  • 2.3 Select material/combination of materials with appropriate radiation resistance/transmission properties
  • 2.4 Arrange for compounding and testing of possible materials as appropriate
  • 2.5 Determine relevant properties of selected material/shortlisted materials
3 Undertake mechanical design of component
  • 3.1 Calculate size and shape/profile of component to meet design brief
  • 3.2 Liaise with product developer to also deliver required aesthetic aspects
  • 3.3 Liaise with product developer/production to ensure efficiency in manufacture
  • 3.4 Suggest modifications to materials/compound as required
4 Design jointing/joining/ other product interfaces
  • 4.1 Liaise with designers of other components
  • 4.2 Agree on interface requirements/joints/joining as appropriate
  • 4.3 Design suitable interfaces
  • 4.4 Check interface design to ensure it meets the end use requirements without sacrificing integrity
5 Finalise design
  • 5.1 Check internal consistency of design
  • 5.2 Check overall design meets end use requirements
  • 5.3 Ensure issues identified in the hazard analysis for both end use safety requirements and manufacturing requirements are addressed in the final design
  • 5.4 Write component specification
  • 5.5 Liaise with product developer/production to write production specification/procedures
  • 5.6 Supervise manufacture and testing of prototypes/manufacturing trials as appropriate
  • 5.7 Finalise specifications and manufacturing processes, and complete all reports
  • 5.8 Ensure project records are complete and all required reports have been completed and submitted
  • 5.9 Archive records according to company procedures
No information
No information
Replaces
State Code National Code Title Type
WA974 PMC556031C Design structural/mechanical components Unit of competency
State Code National Code Title Type
BCU5 PMC60116 Advanced Diploma of Manufactured Mineral Products Qualification