Unit of competency Outline

Date retreived
23/07/2026 9:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lay out patterns and cut fabrics

Lay out patterns and cut fabrics

Unit of competency
National Code
MSFSF3016
State Code
OEL11
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
40
Description
This unit describes the skills and knowledge required to lay out patterns and cutting fabrics for construction of diverse soft furnishings and upholstery products. Fabrics may be single or double layer and include both plain fabrics and those which involve matching stripes, checks and pattern repeats. Workers with this competency follow established procedures, using discretion, judgement and problem-solving to identify and resolve potential issues. They recognise dependencies and use cooperative approaches to optimise workflow and productivity.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan task
  • 1.1 Identify task requirements, including specifications, patterns, fabrics, number of items to be cut and required equipment, from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Identify specific cutting requirements and whether cutting table guides are needed
  • 1.4 Select suitable work area and clean of any contaminants
  • 1.5 Select equipment and tools to suit fabric and other task requirements and check that they are safe and functional
  • 1.6 Check that cutting tools are sharp
  • 1.7 Select fabrics to meet task requirements and lay out smooth and square
2. Prepare materials for cutting
  • 2.1 Inspect fabrics for flaws and appropriate finish
  • 2.2 Identify naps, direction of pattern, pattern repeat and finished side of materials
  • 2.3 Square up fabrics to edges or guide markings on cutting table
  • 2.4 Lay out patterns in accordance with work procedures and instructions using registration points on pattern and other instructions to match required fabric pattern
  • 2.5 Measure and make required adjustments
3. Complete cutting operations
  • 3.1 Cut fabrics to meet task requirements
  • 3.2 Prepare cut fabrics for distribution or next process in accordance with task requirements and workplace procedures
  • 3.3 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 3.4 Complete and store documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI636 MSFSF3007 Lay out patterns and cut fabrics Unit of competency
State Code National Code Title Type
BIJ6 MSF20122 Certificate II in Furnishing Qualification