Unit of competency Outline

Date retreived
22/07/2026 9:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install, configure and test a router

Install, configure and test a router

Unit of competency
National Code
ICTTEN417
State Code
AWG33
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
020113 - Networks And Communications
Original Release Date
05/07/2016
Nominal Hours
55
Description
This unit describes the skills and knowledge required to undertake router installation and configuration, as part of an upgrade in an existing network or the implementation of a new network.It applies to individuals who carry out installation, maintenance and upgrade of information and communication technologies (ICT) networks.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install router
  • 1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards
  • 1.2 Arrange site access according to required procedure
  • 1.3 Ascertain network topology from technical requirements
  • 1.4 Determine the internet protocol (IP) addressing scheme for the network topology
  • 1.5 Evaluate network management and security requirements, with reference to current and future requirements
  • 1.6 Select a router with appropriate features according to technical requirements
  • 1.7 Choose cables, wireless application protocol (WAP), wide area network (WAN) connectors and other peripherals according to network and router specification, and WAN protocols
2. Install and configure router
  • 2.1 Assemble router and peripherals according to manufacturer’s requirements, enterprise guidelines and protocols
  • 2.2 Connect communications cables and WAN connectors to the router and network
  • 2.3 Configure router according to manufacturer’s instructions and technical requirements, taking into account interoperability requirements with network components
3. Test router and reconfigure network
  • 3.1 Test the router for connectivity across the network and for routing protocol functions
  • 3.2 Adapt or modify predetermined router configuration, depending on outcome of tests
  • 3.3 Review router in line with organisational requirements
  • 3.4 Test router and peripherals according to manufacturer’s instructions and technical requirements
  • 3.5 Test hardware and router to ensure full functionality and interoperability
  • 3.6 Reconfigure additional hardware as required
  • 3.7 Make adjustments to network depending on test results
4. Complete documentation and clean worksite
  • 4.1 Tabulate test results and complete all user reports
  • 4.2 Complete report and notify client of network status
  • 4.3 Clean up and restore worksite to client’s satisfaction
  • 4.4 Secure sign-off from appropriate person
No information
No information
Replaces
State Code National Code Title Type
D3467 ICTTEN4199A Install, configure and test a router Unit of competency