Unit of competency Outline

Date retreived
22/07/2026 8:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set, operate and monitor specialist reconditioning machines

Set, operate and monitor specialist reconditioning machines

Unit of competency
National Code
AURTTW002
State Code
AXA28
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to set, operate and monitor specialist machines used in reconditioning engine or vehicle components. It involves preparing for the task, setting up, operating and monitoring specialist machines, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. This unit does not cover crankshaft or camshaft grinding.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Machine information is sourced, procedures and methods are analysed, and tools required for the machining process are selected
  • 1.3 Tools and measuring equipment are selected and checked for serviceability
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Technical and calibration requirements for machining are determined and support equipment is identified and prepared
  • 1.6 Components are measured and required repair action is determined
2. Set machine
  • 2.1 Machine is set up according to manufacturer specifications and workplace procedures, and without causing damage to any component or system
  • 2.2 Component is positioned and clamped according to manufacturer specifications and workplace procedures
  • 2.3 Machine is adjusted to meet operational requirements and specifications using appropriate measuring equipment and according to manufacturer specifications and workplace procedures
  • 2.4 Tooling and accessories for the job are selected, and worn or damaged tooling is identified and changed or sharpened, according to manufacturer specifications and workplace procedures
3. Operate and monitor machine
  • 3.1 Machine is operated according to workplace procedures and safety requirements, following machinery safe operating procedures and without causing damage to any component or system
  • 3.2 Components are measured to ensure compliance with specifications
  • 3.3 Sharpness of tooling is monitored and tooling is sharpened or replaced to meet requirements
  • 3.4 Finished product is checked for alignment, tolerance and finish according to specifications and workplace procedures
  • 4.1 Complete work processes
  • 4.1 Final inspection is made to ensure finished work complies with workplace requirements
  • 4.2 Bright surfaces are treated with rust prevention solution and component is prepared for further process or storage according to workplace procedures
  • 4.3 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF444 AURTTW3002 Set, operate and monitor specialist machines Unit of competency
State Code National Code Title Type
BAB8 AUR31316 Certificate III in Automotive Engine Reconditioning Qualification