Unit of competency Outline
Date retreived
22/07/2026 5:02 PM AWST
22/07/2026 5:02 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate and troubleshoot produced water and water injection systems
Operate and troubleshoot produced water and water injection systems
Unit of competency
National Code
PMAOPS357
PMAOPS357
State Code
OCK80
OCK80
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
09/03/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
09/03/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to operate and troubleshoot produced water and water injection systems.This unit applies to autonomous operators who are required to demonstrate an understanding of the process and the equipment operation in a plant with local control, or in liaison with the control-room operator in a plant with a centralised control panel.This unit applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control-room operator, as appropriate. In the case of a large, complex plant, the operations technician would be part of a team during startup and shutdown activities.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Operate produced water and water injection systems according to procedures
- 1.1 Receive and give shift handover
- 1.2 Communicate with personnel to identify and coordinate work requirements
- 1.3 Identify, control and report system hazards
- 1.4 Check for recent work undertaken on system and address outstanding and incomplete work
- 1.5 Perform routine checks, and complete logs and documentation
- 1.6 Adjust system according to operational parameters
2. Identify and respond to abnormal situations during operation
- 2.1 Monitor field system, data and instrumentation to ensure system operates according to specification
- 2.2 Identify impacts of changes upstream and downstream
- 2.3 Identify actual and developing situations that may require action
- 2.4 Take action to remedy abnormal situations
- 2.5 Complete required documents outlining abnormal situation management and corrective action taken
3. Shut down and prepare produced water and water injection systems for maintenance
- 3.1 Shut down system according to workplace procedures
- 3.2 Identify, control and report shutdown hazards
- 3.3 Monitor shutdown and identify abnormal situations that may require action
- 3.4 Take action to remedy abnormal situations according to workplace procedures
- 3.5 Shut down and changeover duty and standby equipment according to workplace procedures
- 3.6 Isolate system from energy sources
4. Prepare and start up produced water and water injection systems
- 4.1 Check for recent work undertaken on system and address outstanding and incomplete work
- 4.2 De-isolate and prepare system to be returned to standby or service
- 4.3 Complete pre-start checks according to workplace procedures
- 4.4 Start up system according to workplace procedures
- 4.5 Identify, control and report startup hazards
- 4.6 Monitor startup and identify abnormal situations that may require action
- 4.7 Take action to remedy abnormal situations according to workplace procedures
No information
No information
No information
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGB2 | PMA30120 | Certificate III in Process Plant Operations | Qualification |