Unit of competency Outline

Date retreived
22/07/2026 3:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and tune glazing equipment

Set up and tune glazing equipment

Unit of competency
National Code
PMC553021
State Code
BAH24
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to set up and tune a process for application of glaze to ceramic or clay products. Set-up and tuning is typically required for start-up, job change and equipment changes in preparation for production.This unit of competency applies to experienced operators, leading hands, supervisors or those in similar roles who are required to perform shutdown and isolation procedures, prepare and set up equipment, make adjustments to remedy faults and non-conformity and solve problems within area of responsibility. This competency does not require operation of a control panel.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The experienced operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for glazing equipment set-up
  • 1.1 Identify all safety and emergency procedures
  • 1.2 Shut down equipment to procedures and manufacturer specifications
  • 1.3 Isolate equipment in accordance with procedures
  • 1.4 Remove ancillary equipment to procedures and manufacturer specifications
  • 1.5 Complete records and logs for set-up of equipment or changing of parts
2 Prepare the process for production
  • 2.1 Consult the production schedule to determine the product to be manufactured
  • 2.2 Ensure availability of raw materials as required
  • 2.3 Identify and provide equipment/change parts, ancillaries and fixtures in accordance with production schedule
  • 2.4 Perform equipment preparation to procedures
  • 2.5 Monitor equipment condition and take corrective action if equipment is in an unsafe condition
3 Set up process
  • 3.1 Perform checks and tests to product and equipment specifications
  • 3.2 Align all equipment to product specifications and procedures
  • 3.3 Set up process/equipment as required for the production schedule
4 Tune the process
  • 4.1 Monitor operation and compare with procedures for appropriate operation
  • 4.2 Identify any deviation from standard performance
  • 4.3 Identify the cause of the deviation and take action
  • 4.4 Make adjustments to the equipment settings, process conditions or raw materials to bring production into specification
  • 4.5 Continue monitoring operation and making adjustments until product/equipment is within specification
5 Respond to problems
  • 5.1 Identify possible routine and non-routine problems in the equipment or process
  • 5.2 Determine problems needing action
  • 5.3 Determine possible fault causes
  • 5.4 Rectify problem using appropriate solution within area of responsibility
  • 5.5 Report problems outside area of responsibility to designated person
6 Control hazards
  • 6.1 Identify hazards from the job to be done
  • 6.2 Identify other hazards in the work area
  • 6.3 Assess the risks arising from those hazards
  • 6.4 Implement measures to control those risks in line with procedures
No information
No information
Replaces
State Code National Code Title Type
WA960 PMC553021C Set up and tune glazing equipment Unit of competency