Unit of competency Outline

Date retreived
22/07/2026 5:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Testing of connections to low voltage electricity networks

Testing of connections to low voltage electricity networks

Unit of competency
National Code
UETDRMP011
State Code
OEF18
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/10/2022
View on TGA
State Implementation and Classification
Approved Date
17/02/2023
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
17/02/2023
Nominal Hours
16
Description
This unit involves the skills and knowledge required to perform testing of connections to low voltage (LV) electricity networks in the electricity supply industry (ESI) environment.It includes the requirements for testing when connecting and/or reconnecting a customer’s installation to an electricity supply network and how it applies to ESI workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility and mutual aid requirements.Note: Those holding an existing Certificate III ESI or Certificate III Electrotechnology qualification or equivalent meet the prerequisite unit requirements.Refer to the UET Transmission, Distribution and Rail Sector Training PackageCompanion Volume Implementation Guide for equivalency definition.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to perform test procedures
  • 1.1 Workplace requirements for perform testing of connections are identified and confirmed
  • 1.2 Hazards are identified, risks assessed, and control measures identified and applied
  • 1.3 Tools, equipment and personal protective equipment (PPE) required for testing are determined, obtained and confirmed in working order
2 Carry out test procedures
  • 2.1 Hazard control measures are monitored in accordance with workplace requirements
  • 2.2 Use of tools, equipment and PPE for testing are carried out in accordance with workplace requirements
  • 2.3 Testing of connections to electricity networks are conducted in accordance with workplace requirements and AS4741
  • 2.4 Corrective actions are undertaken in accordance with workplace requirements
3 Complete the test procedures
  • 3.1 Test results are recorded in accordance with workplace requirements
No information
No information
Replaces
State Code National Code Title Type
OBH28 UETTDRRF11 Testing of connections to low voltage electricity networks Unit of competency
State Code National Code Title Type
BHB7 UET30621 Certificate III in ESI - Distribution Overhead Qualification