Unit of competency Outline
Date retreived
22/07/2026 2:07 PM AWST
22/07/2026 2:07 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce complex adhesive, mechanical or sewn fastened product
Produce complex adhesive, mechanical or sewn fastened product
Unit of competency
National Code
ICPCBF3620
ICPCBF3620
State Code
OBP60
OBP60
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
50
Description
This unit describes the skills and knowledge required to produce complex adhesive, mechanical or sewn fastened product, to monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and clean and shut down equipment. It applies to individuals who work under direct supervision with limited responsibility in preparing materials and equipment and resolving issues to produce a finished product. Some equipment may also involve cutting, trimming, folding and/or gathering (collating), which may be assessed at the same time.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain operation of transportation system
- 1.1 Monitor and adjust feeder according to work health and safety (WHS) requirements
- 1.2 Monitor and adjust sheet and section pick-up and transport system
- 1.3 Add substrate to the process according to job specifications
2. Maintain operation of delivery system
- 2.1 Monitor and adjust delivery system
- 2.2 Check and adjust wire straightness, length, cut-off and clinching pressures
- 2.3 Review and adjust adhesion, thread tension and stitch quality
3. Maintain production process
- 3.1 Monitor and adjust in-line processes
- 3.2 Use machine controls as required
- 3.3 Review and verify performance using the process control system
- 3.4 Report process adjustments to eliminate problems according to enterprise procedures
4. Identify and rectify problems and faults
- 4.1 Identify and report problems in machine operation according to enterprise procedures
- 4.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
- 4.3 Verify repairs and adjustments as required prior to resumption of operations
5. Conduct shutdown of production process
- 5.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
- 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
- 5.3 Clean and disengage all required parts of machinery used in printing process
- 5.4 Complete required production records and enterprise documentation
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUO15 | ICPCBF362 | Produce complex adhesive, mechanical or sewn fastened product | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFB9 | ICP31320 | Certificate III in Print Binding, Finishing and Packaging | Qualification |