Develop, trial and evaluate prototypes

Unit of competency Outline

Date retreived
23/07/2026 2:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFFDM5007

State Code
ODZ45

TGA Status
Current

DTWD Status
Approved

Current Release Number
1.00

Current Release Date
03/06/2022

View on TGA

State Implementation and Classification

Approved Date

15/11/2022

Field of Education

030113 - Cabinet Making

Original Release Date

15/11/2022

Nominal Hours

Description

This unit covers the skills and knowledge required to develop specifications, identify and select materials and processes, perform a production trial of prototypes and complete evaluation tasks and documentation. Prototypes may be produced by hand, by using appropriate machines, tools and equipment or by computer-assisted production, and may require the application of joinery, construction and finishing techniques.This unit applies to individuals working alone in an industry operation of any size, or a design studio environment, where they play a lead role in the design and prototyping of products, either alone or as part of an internal or external team.No licensing or certification requirements apply to this unit at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.

Notes

Elements and Performance Criteria

1. Develop prototype or sample specifications

1.1 Identify and analyse purpose and outline requirements for prototype or sample from design concepts or customer requirements
1.2 Research and identify materials suitable to match design concepts or customer requirements
1.3 Research and identify appropriate construction requirements and methods for materials to be used
1.4 Research and identify ergonomic requirements from design concepts or customer requirements and in accordance with principles of ergonomic design
1.5 Prepare and document detailed prototype or sample design specifications, including drawings as required, following industry best-practice methods

2. Plan for prototype construction

2.1 Verify that purpose of prototype or sample is reflected in plans and drawings
2.2 Verify materials specifications and compatibility for item from prototype or sample documentation
2.3 Verify construction requirements and methods including equipment for materials being used
2.4 Prepare work plan for item, including construction stages or steps, checkpoints for measurements and tests, assembly methods, and work health and safety considerations, in accordance with workplace procedures
2.5 Clean and clear a suitable work area for prototype or sample production
2.6 Ensure required materials and other items are available and ready for use
2.7 Ensure jigs and other construction aids are identified and where required adjusted to suit work

3. Produce the prototype

3.1 Follow work plan to construct the prototype or sample, referencing any sketches and other job specifications
3.2 Conduct checks at the identified points and in accordance with workplace procedures
3.3 Identify, document and implement any required modifications to design and plan within workplace procedures
3.4 Perform initial inspection of prototype or sample to ensure it is fit for purpose
3.5 Ensure learnings from prototype construction are referred back to development personnel

4. Finalise the work sequence

4.1 Prepare prototype or sample for finishing in accordance with design specification
4.2 Clean, maintain and store tools and equipment in accordance with manufacturer specifications
4.3 Clean and clear work area, including applying waste management strategies in accordance with workplace procedures
4.4 Complete workplace documentation, including recommendations for optimisation of prototype or sample brief or work plan

5. Trial and evaluate the prototype

5.1 Develop, specify and document trial objectives and processes in accordance with industry best-practice methods
5.2 Ensure personnel involved in trial and evaluation are prepared for their responsibilities and functions
5.3 Prepare and certify trial equipment, tools and materials prior to use in accordance with relevant specifications and workplace procedures
5.4 Conduct prototype or sample trials and capture or record results in accordance with trial specifications
5.5 Evaluate results of trial including longevity of product and make recommendations for production in accordance with procedures

No information

Replaces

State Code	National Code	Title	Type
WI469	MSFFT5008	Develop, trial and evaluate prototypes	Unit of competency

State Code	National Code	Title	Type
BHR2	MSF50322	Diploma of Furniture Design and Manufacturing	Qualification