Unit of competency Outline

Date retreived
22/07/2026 7:58 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install recreational vehicle floors and floor coverings

Install recreational vehicle floors and floor coverings

Unit of competency
National Code
MSMRV369
State Code
OFD51
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/02/2023
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
030509 - Automotive Body Construction
Original Release Date
24/05/2023
Nominal Hours
35
Description
This unit describes the skills and knowledge required to install floors and lay floor coverings in recreational vehicles.The unit applies to a person working in a recreational vehicle manufacturing facility who undertakes routine tasks according to job instructions, plans/specifications and procedures and uses discretion and judgement in selecting equipment, services and contingency measures. They work with a high degree of self-direction and limited supervision. They apply known solutions to routine problems and report non-routine problems according to procedures. They are responsible for their output and have limited responsibility for the output of others.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to install floors
  • 1.1 Identify floor installation requirements from job instructions
  • 1.2 Select and check all required tools and equipment are ready to use
  • 1.3 Gather floor, floor covering and other items required by job specifications, and check they meet quality requirements and are ready for installation
  • 1.4 Identify hazards and hazard controls and check the hazard controls are in place and operating
  • 1.5 Secure the chassis and check it and the work area are ready for installing the floor
2. Install floors
  • 2.1 Cut the floor material according to job specifications and workplace procedures
  • 2.2 Fabricate and install wheel arches according to workplace procedures
  • 2.3 Apply adhesive to the chassis according to manufacturer’s instructions
  • 2.4 Lift and align the floor in the correct position using lifting equipment and safe manual handling practices
  • 2.5 Fix the floor to the chassis or other support according to workplace procedures
  • 2.6 Trim off excess and finish fitting the floor to meet quality requirements
3. Lay floor coverings
  • 3.1 Measure and cut the floor covering according to job instructions
  • 3.2 Place, align and fit the floor covering in position
  • 3.3 Apply adhesives according to the manufacturer’s instructions and safety requirements
  • 3.4 Fix the floor covering to the floor and wheel arches according to workplace procedures
  • 3.5 Trim off excess and finish laying the floor covering to meet quality requirements
4. Complete the installations according to workplace procedures
  • 4.1 Clean up the recreational vehicle in readiness for the next task
  • 4.2 Clean up the work area, identify items for recycling and dispose of waste
  • 4.3 Identify, tag and report any damage to equipment and tools
  • 4.4 Check, clean and do routine maintenance on equipment and tools and store them and unused materials
  • 4.5 Complete task outcome documentation
No information
No information
Replaces
State Code National Code Title Type
AWC44 MSMRV310 Fit recreational vehicle floor Unit of competency
State Code National Code Title Type
BJC9 MSM31122 Certificate III in Recreational Vehicle Manufacturing Qualification