Unit of competency Outline
Date retreived
23/07/2026 3:10 PM AWST
23/07/2026 3:10 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Conduct filtering process
Conduct filtering process
Unit of competency
National Code
RIIPBE303A
RIIPBE303A
State Code
WB007
WB007
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
11/02/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/02/2010
Nominal Hours
25
Description
Notes
Elements and Performance Criteria
No information
legislative, organisational and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
mining safety and health
mine inspection
OHS
explosives
belt weighs
compressors
distribution control systems
feeders
gantry cranes and attachments and other mobile equipment
hand and power tools
hoses (water and air)
pump systems
conveyors
availability of equipment
detection of conditions that are unusual
fluid levels
job requirements/personnel availability
walk through plant
drainage
dust (dump)
emissions
flora and fauna
hazardous chemicals
noise
recycling
run-off
spills
waste management and disposal
water quality
air systems
cameras and monitors
checking interlocks
checks distribution control system (DCS)
chutes
display instruments, lights and gauges
equipment stop engine lights
filters/hydraulic system
isolations
lighting
suppression systems
valves
visual and audio warning devices and lights
current
flow
levels
pressure/speed
unusual noises/vibrations
air systems
blockages and spillages
feed rates
filters
in stream analysis (ISA)
levels of ponds and catchment areas
mineral content
on stream analysis (OSA)
overloads
particle size indicators (PSI)
power draw
pressures/temperatures
wear and tear
degreasing
forced air
hosing with water
suction
candle
drum
pressure
compression
leaf
oils
plastic
solvents
manufacturer's guidelines and specifications
Australian standards
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
mining safety and health
mine inspection
OHS
explosives
belt weighs
compressors
distribution control systems
feeders
gantry cranes and attachments and other mobile equipment
hand and power tools
hoses (water and air)
pump systems
conveyors
availability of equipment
detection of conditions that are unusual
fluid levels
job requirements/personnel availability
walk through plant
drainage
dust (dump)
emissions
flora and fauna
hazardous chemicals
noise
recycling
run-off
spills
waste management and disposal
water quality
air systems
cameras and monitors
checking interlocks
checks distribution control system (DCS)
chutes
display instruments, lights and gauges
equipment stop engine lights
filters/hydraulic system
isolations
lighting
suppression systems
valves
visual and audio warning devices and lights
current
flow
levels
pressure/speed
unusual noises/vibrations
air systems
blockages and spillages
feed rates
filters
in stream analysis (ISA)
levels of ponds and catchment areas
mineral content
on stream analysis (OSA)
overloads
particle size indicators (PSI)
power draw
pressures/temperatures
wear and tear
degreasing
forced air
hosing with water
suction
candle
drum
pressure
compression
leaf
oils
plastic
solvents
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for conduct filtering processes
implementation of requirements, procedures and techniques for the safe, effective and efficient completion of filtering processes
working with others to undertake and complete the filtering processes in a way that meets all of the required outcomes
consistent timely completion of filtering processes that safely, effectively and efficiently meets the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistent achievement of required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the filtering processes
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for conduct filtering processes
implementation of requirements, procedures and techniques for the safe, effective and efficient completion of filtering processes
working with others to undertake and complete the filtering processes in a way that meets all of the required outcomes
consistent timely completion of filtering processes that safely, effectively and efficiently meets the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistent achievement of required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the filtering processes
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2392 | MNMPBE308A | Conduct filtering process | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| D9366 | RIIPBE303B | Conduct filtering process | Unit of competency |