Unit of competency Outline

Date retreived
22/07/2026 8:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Tune a piano aurally and electronically within time and accuracy constraints

Tune a piano aurally and electronically within time and accuracy constraints

Unit of competency
National Code
MSFPT3014
State Code
WI612
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers tuning an upright and grand piano to a set level of accuracy within a specified timeframe and to an appropriate level of accuracy using aural or electronic tuning devises (ETD) that may include computer software or a hardware device. It applies in workplace and on-site environments for small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan for tuning a upright or grand piano
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices relevant to repairing pianos are verified and complied with
  • 1.2 Customer requirements are received, analysed and confirmed with appropriate personnel
  • 1.3 Communication with others involved with the work is established and maintained to ensure efficient work flow, coordination, personnel cooperation and safety
  • 1.4 Written instructions are followed
2 Prepare to tune a upright or grand piano
  • 2.1 Tools and equipment are selected consistent with the needs of the job
  • 2.2 Selected tools and equipment are checked for service ability and safety, and any faults repaired and reported according to workplace practices
  • 2.3 Personal protective equipment is correctly fitted and used
3 Dismantle piano
  • 3.1 Procedure for dismantling piano is determined
  • 3.2 Piano is dismantled to allow access to internal components during the tuning process
  • 3.3 Correct WHS procedures are followed throughout dismantling process
  • 3.4 Safe storage of all piano parts while tuning is demonstrated
4 Tune piano
  • 4.1 Correct posture for tuning is demonstrated which minimises fatigue and promotes muscular control
  • 4.2 Start note is tuned accurately to a pitch standard
  • 4.3 Temperament octave F33-F45 is tuned to desired standard
  • 4.4 Octaves and unisons are tuned to desired standard in accordance with customer specifications
  • 4.5 Interval checks are used to assess accuracy throughout tuning process
  • 4.6 Stable tuning is achieved in an industry acceptable timeframe without damage to the piano components
5 Re-assemble piano
  • 5.1 Case parts are identified and placed for re-assembly
  • 5.2 Case parts are re-assembled according to workplace practices
  • 5.3 Correct WHS practices are followed throughout assembly process
6 Clean up work area
  • 6.1 All tools, materials and other equipment are checked, cleaned and returned to their appropriate location
  • 6.2 Work area is cleared and waste removed
  • 6.3 Workplace documentation is completed and filed
No information
No information
Replaced By
State Code National Code Title Type
OEL76 MSFPT4012 Tune a piano aurally and electronically Unit of competency
State Code National Code Title Type
J740 MSF31213 Certificate III in Piano Technology Qualification
AB649 MSFSS00001 Piano Tuning Skill Set Skill set