Unit of competency Outline

Date retreived
22/07/2026 9:18 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use stonemasonry tools, plant and equipment

Use stonemasonry tools, plant and equipment

Unit of competency
National Code
CPCCST2007
State Code
OCP57
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
85
Description
This unit specifies the skills and knowledge required to safely and effectively use stonemasonry tools, plant and equipment when assisting with stonemasonry work. It includes the introduction to and the operational and functional features of stonemasonry hand and power assisted tools, plant and equipment. The unit is suitable for people with basic skills and knowledge who undertake routine stonemasonry work under the direction of more experienced workers on a new or existing structure on a commercial or domestic site.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work.
  • 1.1 Read, interpret apply hand and power tool and equipment requirements from manufacturer’s operational instructions, workplace procedures and workplace safety requirements.
  • 1.2 Identify stonemasonry project requirements from plans and work instructions.
  • 1.3 Identify potential hazards and determine and implement control measures.
  • 1.4 Select and check condition of plant, equipment and tools and report damage or faults.
  • 1.5 Clarify job priorities and sequence with others on site.
2 Prepare for work.
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Identify and select plant, equipment and hand and power tools appropriate for the task.
  • 2.3 Identify any operation or function limitations of plant, equipment and tools.
  • 2.4 Check equipment and tools to ensure guards, guides, controls and switches are fitted and functioning.
  • 2.5 Examine hoses for damage and check electrical leads and power tools are tagged.
  • 2.6 Inspect equipment, used for holding, clamping and supporting materials prior to and during operation, for faults.
  • 2.7 Remove from service and report any damage to equipment and tools.
3 Use plant, equipment and tools.
  • 3.1 Connect power assisted tools to a residual current device (RCD) and conduct a pre-operational check prior to use.
  • 3.2 Use plant, equipment and tools safely and effectively and only for intended purpose.
  • 3.3 Disconnect electrical and pneumatic equipment from source and place in a safe location when not in use.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 4.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 4.3 Store and secure tools and equipment following workplace procedures.
No information
No information
No information
State Code National Code Title Type
BGC8 CPC20220 Certificate II in Construction Pathways Qualification
BGE7 CPC32320 Certificate III in Stonemasonry Qualification