Unit of competency Outline

Date retreived
22/07/2026 2:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service marine outboard and stern drive transmissions

Service marine outboard and stern drive transmissions

Unit of competency
National Code
AURR207670B
State Code
D7646
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to carry out the servicing of outboard and stern drive transmissions and associated components on vessels. It requires the ability to identify and confirm work requirements, service marine outboard and stern drive transmissions and to complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
  • 1.3. Source service procedures and relevant workshop manuals and manufacturer information
  • 1.4. Check and prepare tools, equipment and materials
  • 1.5. Determine service method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures
  • 1.6. Set up work area
2. Service outboard and stern drive transmissions and associated components
  • 2.1. Conduct service in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.2. Conduct pre-start checks, make required adjustments and re-test
  • 2.3. Check that protective guards, cowlings and safety features are in place according to workplace expectations
  • 2.4. Determine the need for water testing
3. Clean up work area and finalise work
  • 3.1. Make final inspection
  • 3.2. Clean and inspect equipment and tooling according to workplace requirements
  • 3.3. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 3.4. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons, as required
  • 3.5. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2928 AURR207670A Service marine transmissions (outboard and stern drive) Unit of competency
Replaced By
State Code National Code Title Type
WF345 AURRTX2001 Service marine outboard and stern drive transmissions Unit of competency
State Code National Code Title Type
D537 AUR20611 Certificate II in Marine Qualification
D541 AUR30511 Certificate III in Marine Qualification